Page 1
DEva Integrated Lighting System 1000W 120/240v, 240/277v, 347/480v Owner's Manual 24 July, 2017 Revolution Microelectronics Co., Ltd Page 1 of 6...
Page 2
MUST be removed before powering up the light. Hang the DEva from the four eye bolts installed on the top of the light, and make sure to use a cable tie to make a “drip loop”...
Give up, switch off, this is not happening After 30 minutes and five (5) tries to start, DEva flashes the OFF LED four (4) times a second to let you know that she's off, and intending to stay off until reset or power is removed.
Page 4
When the provided RJ-12 phone cable is plugged into the DEva and an RLC1 controller, the front panel lights on the DEva will show the closest power setting and the LED will blink off, very briefly, once a second to show you that the DEva is controlled by an outside source and that pressing the button will not work.
> 99.4% Light Source 1000W 400v double-ended lamp Luminous Flux > 2100 uMole/sec External Dim Revolution or Autopilot controller External Dim Connector RJ14 telephone interconnect type (6P6C) Internal Dim Push button on panel Output power 600 – 1150 dimmable in 1% steps...
Page 6
Consumer standard for Industrial, Scientific, and Medical Equipment for both conducted and radiated emissions. Although not required by the FCC, the DEva has also been qualified in the same laboratory to pass FCC Part 15B, usually reserved for computers, pro audio, and similar consumer electronic devices.
Need help?
Do you have a question about the DEva and is the answer not in the manual?
Questions and answers