Trigger the capture ......................8 Reset all photo numbers ....................8 Build bullet time video ......................9 Start CamFi Matrix Time ....................9 Set the watch folder and build folder ..............9 Start Auto watch ......................9 Manual Building ......................10...
It can also operate a single camera to live view, adjust camera parameters, and so on. CamFi Matrix also includes a tool named CamFi Matrix Time to build Bullet Time effect videos. When multiple cameras are triggered, the photos will be transmitted...
Hardware preparation CamFi (same count as cameras) DSLR cameras PC or laptop (Windows 7 X64 above, high performance PC is better) Gigabyte Ethernet switch or a wireless router Wireless Shutter Release (Optional) ...
2. Connect CamFi to the PC with an Ethernet cable, then run the CamFi windows app to upgrade the firmware. 3. After the reboot, set up the static IP of CamFi by Settings > Network Settings. Reboot again. 4. Run CamFi Matrix. Click the “Add” button. Input the IP configured by step 3.
Page 8
PC via http://cam-fi.com/en/download.html 2. Connect CamFi to the PC with an Ethernet cable, then run the CamFi Windows app to upgrade the firmware. 3. After the rebooting, set the connection mode to Bridge Mode by Settings > Connection Mode. Select the Wifi network you want to join. Reboot again.
Please make sure it is checked when using CamFi Matrix Time Tool. You may set a different folder for each CamFi by right clicking the CamFi list. Select “Download” folder. This option will be ignored if “Settings > Auto rename and...
The capture may fail when a camera is out of battery. The photo numbers need to be reset to keep the photo names consistent. Please right click the CamFi list. Select “Reset all photo numbers”. This will reset all the photo numbers to the max value.
Build bullet time video Start CamFi Matrix Time Open the app by clicking Start > CamFi Matrix > CamFi Matrix Time. It should run while CamFi Matrix is running. Set the watch folder and build folder Please set the watch folder to be same as the default folder setting in CamFi Matrix by Settings >Watch folder.
Manual Building Please click the “Build” button on the task entry to start manually building. It will build the video even the photos are less than the camera count. Play the video Please click the “Play” button on the task entry to play the video. It will use the default video player to play the video.