Table of Contents
Advertisement
f
Confirm with the
OK
recorder-remote control. The video recorder compares
the TV channels on the TV set and the video recorder.
If the video recorder found the same TV channel as the
TV set, then it stores it at 'P01'.
D When 'NOTV' (no signal from TV set) appears in the
display, the TV channels can not be allocated
automatically. In this case, read 'Manual TV channel
allocation'.
g
Wait until, for example, 'TV02' appears.
h
Select the next programme number, for example, '2' on
the TV set.
i
Confirm with the
OK
recorder-remote control.
D If you allocated the wrong TV channeL, you can go
back one step with the
j
g
i
Repeat steps
to
allocated.
k
To end, press the
TV/STANDBY m
Automatic TV channel search (Autoinstall)
The video recorder will search for all TV channels. It stores TV
channels found in the following sequence: BBC 1, BBC 2, ITV,
CH 4, CH 5, SKY, others.
D If you want to start the automatic TV channel search
again, then follow the instructions below.
a
Switch on the TV set. If required, select the programme
number for the video recorder.
b
Press the
button on the remote control. The main
MENU
menu will appear.
c
Select the line 'AUTOINSTALL' with the
P q
button.
d
Press the
button. The 'Automatic TV channel search'
OK
starts.
AUTOINSTALL
8
button on the video
button on the video
button.
CLEAR (CL), y
until all TV channels have been
button.
P r
or
00
Wait until all TV channels have been found. This can take
several minutes.
e
When Autoinstall is complete, 'READY' will appear on the
display.
The time and date information have been set.
How to search for a TV channel manually, you can read in the
section 'Manual TV channel search'.
Monitor function
You can switch backwards and forwards between TV picture
and video recorder picture with the
only works when you use a scart cable to connect the video
recorder to your TV set and if your TV set responds to this
switch-over.
Sorting and clearing TV channels manually
You can assign any programme number to a TV channel that
you have stored and you can also delete unwanted TV
channels.
a
Switch on the TV set. If required, select the programme
number for the video recorder.
b
Press the
button on the remote control. The main
MENU
menu will appear.
c
Select the line 'CHANNEL ALLOCATION' with
P q
button and confirm with the
P01
------------------------
-/+
d
With the
P r
or
P q
which you want to give a programme number (starting
with 'P01').
e
Confirm with the
OK
D If you want to delete a TV channel, press the
button.
CLEAR (CL), y
f
d
e
Repeat steps
to
number to all TV channels.
g
To end, press the
TV/STANDBY m
button. But this
MONITOR
button.
OK
CH26
CL
OK
button, select the TV channel to
button.
until you have given a programme
button.
P r
or
Advertisement
Table of Contents
