Table of Contents
Advertisement
Quick Links
HD 1080P 60FPS Game Capture
Quick Start Guide
Thanks for purchasing HD game capture. Hope this device will bring you nice digital
experience.
With the Full HD 1080P 60FPS game capture, just plug to your PC (Windows, Mac,
Linux), no need install the extra driver, you can use any 3rd party software to capture
or stream your HD game, or other HD video source.
Features:
1. USB3.0 port – To connect to computer with the enclosed USB3.0 Male-to-Male
cable.
2. LED indicator – Will be on when connecting to a computer.
3. HDMI input port – Connect video source or game console with a HDMI cable.
Work on Windows:
1) Connect the HD game capture to a computer with the USB cable, please wait
some minutes, the operation system would install the drive automatically, then there
would show a new device "FHD Webcamera" in Device Manager.
1 / 8
Advertisement
Table of Contents
Summary of Contents for HopCentury HD-USB3
- Page 1 HD 1080P 60FPS Game Capture Quick Start Guide Thanks for purchasing HD game capture. Hope this device will bring you nice digital experience. With the Full HD 1080P 60FPS game capture, just plug to your PC (Windows, Mac, Linux), no need install the extra driver, you can use any 3rd party software to capture or stream your HD game, or other HD video source.
- Page 2 2) After the drive installed, right click on “Speaker” of your computer, choose “Recording devices”. 3) Double click “FHD Webcamera”, at “Advanced” section, set the sample rate as “2 channel 16 bit, 48000 Hz (DVD Quality)”. (If it is not smoothly when recording, please set it as “2 channel, 16 bit, 44100 Hz (CD Quality)”...
- Page 3 Work with OBS Studio: 1, Go to obsproject.com/download to download the latest OBS Studio, and install it on your computer. Then connect the HD game capture to the computer with the USB3.0 cable, connect to the video source with a HDMI cable. After the operation system installed the driver, you will see “FHD Camera”...
- Page 4 set it back as “Device Default”. 4, Set the Audio Output Mode as “Output desktop audio (WaveOut), select “Use custom audio device” option, then set the Audio Device as “Digital Audio Interface (FHD Webcamera)”: 5, Set the video latency for make the audio and video synchronized if you need: 1) Right click “Video Capture Device”...
- Page 5 2) Click to add “Video Delay (Async)” : 3) Set it to 470ms (You can adjust it smaller or bigger until you found the audio and video synchronized): 6, Then you can recording or streaming video: Note: If you use a laptop with the HD game capture, usually there is a “Mic/Aux” device in the Mixer section, it is the microphone on the laptop, please make it mute when recording to avoid the noise.
- Page 6 Work on MAC: Work with OBS Studio: Download and install OBS studio, then do the same as above on windows. Work with QuickTime Player: 1, Run QuickTime player, select “New Movie Recording”: 2, Choose “FHD Webcamera” under Camera and Microphone option: Work on Linux: Work with OBS Studio: Download and install OBS studio, then do the same as above on windows.
- Page 7 2, Choose “Video camera” ---“/dev/video0” then click “play” 7 / 8...
-
Page 8: Specifications
OS X); vMix (Windows); Potplayer (Windows) and etc. DirectShow (Windows), DirectSound (Windows),V4L2 (Linux), ALSA Development interface (Linux) OS X (QuickTime) compatibility Record Quality Max 1080P 60FPS Tips: you could download this user manual from the following link also: http://www.hopcentury.com/1/HD-USB3.pdf HopCentury Electronic Co., LTD 8 / 8...
Need help?
Do you have a question about the HD-USB3 and is the answer not in the manual?
Questions and answers