1. Manuals
  2. Brands
  3. Yukon Manuals
  4. Log Splitter
  5. HLS1500P
  6. Assembly, testing, operation, servicing & storage instruction

Yukon HLS1500P Assembly, Testing, Operation, Servicing & Storage Instruction

15 tonne hydraulic log splitter
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
15 TONNE HYDRAULIC

LOG SPLITTER

ASSEMBLY, TESTING, OPERATION, SERVICING
& STORAGE INSTRUCTION
PETROL
WARNING!
READ and UNDERSTAND this manual completely before using The log splitter. All operators
of this equipment must read and completely understand all safety information, operating
instructions, maintenance and storage instructions.
Failure to properly operate and maintain the log splitter could result in serious injury to the
operator and bystanders from moving parts that can crush or cut, flying objects, burns, fire
or explosion, escaping high pressure hydraulic fluid, or carbon monoxide poisoning.

Advertisement

Table of Contents
loading

Related Manuals for Yukon HLS1500P

Summary of Contents for Yukon HLS1500P

  • Page 1: Log Splitter

    15 TONNE HYDRAULIC LOG SPLITTER ASSEMBLY, TESTING, OPERATION, SERVICING & STORAGE INSTRUCTION PETROL WARNING! READ and UNDERSTAND this manual completely before using The log splitter. All operators of this equipment must read and completely understand all safety information, operating instructions, maintenance and storage instructions. Failure to properly operate and maintain the log splitter could result in serious injury to the operator and bystanders from moving parts that can crush or cut, flying objects, burns, fire or explosion, escaping high pressure hydraulic fluid, or carbon monoxide poisoning.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS Page 1.0. Disclaimer 1.1. About your Log Splitter ....................................... 2.0. Safety Usage 2.1. General Safety ........................................2.2. Application Conditions ....................................... 3.0. Pre-checks Before Operations 3.1. Knowing your Log Splitter ....................................3.2. Before starting the log splitter ..................................4.0.

  • Page 3: Disclaimer

    1.0 DISCLAIMER 1.1. About your Log Splitter ATTENTION: Congratulation on purchasing your new 15 ton Yukon log All Rental Companies and Private Owners who loan splitter this equipment to others! This log splitter is designed to split wood logs using a All persons to whom you rent, loan or use this the log hydraulically powered moving wedge.

  • Page 4: Safety Usage

    2.0 SAFETY USAGE 2.1. General Safety UNDERSTAND YOUR LOG SPLITTER • Avoid use of free and inadequately insulated connections. Read and understand the owner’s manual and labels Connections must be made with protected material affixed to the log splitter. Learn its application and suitable for outdoor use.

  • Page 5: Application Conditions

    2.2. Application Conditions This log splitter is a home use model. The surrounding humidity should less than 50% at 40ºC. It is designed for operating under ambient temperatures It can be stored or transported under ambient temperatures between +5ºC and 40ºC and for installation at altitudes no between -25ºC and 55ºC.

  • Page 6: Assembly Instructions

    4.0 ASSEMBLY INSTRUCTIONS 4.1. Parts for Assembly Hydraulic Log Splitter M10 Wing & Nut Wheels QTY: 1 QTY: 2 QTY: 2 Wood Support Frame Wheel Axel Circlip QTY: 2 QTY: 2 QTY: 2 M8 Waser & Bolt M10 Screw, Waser & Already Attached QTY: 8 each 15 tonne Hydraulic Log Splitter Assembly, Installation, Care, Maintenance useage Instruction Manual...

  • Page 7: Assembling The Wheel

    4.2. Assembling the wheel WARNING! CLOSELY INSPECT ALL LOG SPLITTER COMPONENTS. (See Machine Components section on page 15-16 of this manual for diagram of components,) • If you have missing components, contact the seller • If you have damaged components, contact the seller SAVE BOLTS FROM PACKAGING: Some packaging bolts are used to assemble the log splitter, while others are used for attachments or spares Step 1...
  • Page 8 Step 4 Slide the wheel (Part C) onto the wheel axle (Part E) Step 5 Using a pair of circlip pliers attach the circlip (Part F) to the wheel axle (Part E) 15 tonne Hydraulic Log Splitter Assembly, Installation, Care, Maintenance useage Instruction Manual...

  • Page 9: Assembling The Wood Support Frame

    4.3. Assembling the Wood Support Frame Step 1 Place the Wood support frame (Part D) to the supports on the bed of the log splitter (Part A). Placing one side on the inside and the other on the outside of the supports on the bed (Part A) Step 2 Attach the screw Wood support frame (Part D) to the supports on the bed (Part A) use...

  • Page 10: Assembling The Cylinder / Wood Pucher

    4.4. Assembling the Cylinder / Wood Pucher Step 1 Turn Log Splitter Off. Push the cylinder to the opposite direction of the splitting Unscew the nut & washer (Part G). Fig. A wedge. Fig. B Fig. A Fig. B Lift the cylinder a bit. Screws back the washer and nut into the bolts.

  • Page 11: Pre-Checks Before Operations

    5.0 PRE-CHECKS BEFORE OPERATIONS Before operating the log splitter, the Bleed Screw should be loosened by some rotations until air can go in and out of the oil tank smoothly. Air flow thru the Bleed Screw hole should be detectable during the log splitter is under operations.

  • Page 12: Operations Instruction

    6.0 OPERATIONS INSTRUCTION Note Tighten the nut before using! Step 2 Push the handle forward for splitting mode. Step 2 Pull the handle backward for returning mode . 15 tonne Hydraulic Log Splitter Assembly, Installation, Care, Maintenance useage Instruction Manual...

  • Page 13: Engine Start-Up Guide

    7.0 ENGINE START-UP GUIDE BEFORE STARTING. check and fill engine with approximately 0.6 litres SAE10W-30oil. Fill the fuel tank with 93+ octane unleaded gasoline NOTE: This engine includes an automatic low oil shut down sensor that disables the engine if the oil level is too low 7.1.

  • Page 14: Stopping The Engine

    Adjust the throttle to the speed you desire. Step 4 IMPORTANT: Allow the engine to warm upwith no load for at least 1 minute after each start-Up. 7.2. Stopping the Engine Move the throttle lever to the right (idle Position). Step 1 Turn the engine switch to the OFF Position.

  • Page 15: Operations & Maintenace

    8.0 OPERATIONS & MAINTENANCE 8.1. Loading Log • Load the log onto beam with a straight cut end against the • Hold bark side. Hold the bark side of logs when loading or splitting wedge - positioned for a lengthwise cut positioning, never the ends.

  • Page 16: Freeing A Jammed Log

    File and smooth any burrs or crushed area along the cutting edge. IMPORTANT If a part needs replacement only use genuine Yukon parts that meets the manufacturer’s specifications. Replacement parts that do not meet specifications may result in a safety hazard or poor operation of the log splitter.

  • Page 17: Specifications

    9.0 SPECIFICATIONS 9.1. Log Specification & Guide Square log ends. Logs that are not cut square Max Log Size. The diameter of the log is can slide out while splitting and become a safety indicative-a small log can be difficult to split when hazard or cause excessive force to log splitter is has knots, tough fiber or green.

  • Page 18: Troubleshooting Guide

    10.0 TROUBLESHOOTING Problem Probable Cause Suggested Remedy Motor Stops Overload Protection Device Contact a qualified Electrician for opening the Pushbutton Box to Staring disengaged to protect the log splitter engage the overload Protection Device inside from being damaged Fails to split Log is Not properly positioned Refer to “Log Splitter Operation”section for perfect log loading.

  • Page 19: Warranty

    11.0 WARRANTY • Kmate Pty Ltd provides a 12 month warranty for this • A claim may be refused if the defective claim has arisen product when used for domestic purposes. Commercial for reasons other than a manufacturers fault or defective use of the product will void all warranty.

Table of Contents