The Acuity will be delivered to you in a pre-assembled state. All you have to do is slide the screen up to your preferred height and connect the power cable to the base.
Do not place your Acuity next to a heat source. • Only use the supplied cables and connect the power cable to a socket. • Ensure that the Acuity is placed at a minimal distance of 10 cm / 4 inches from the edge of the table.
3 Controls - Screen The on/off switch of the Acuity is located on the lower right hand side on the back of the monitor. Hold it for 2 seconds until the startup or shutdown tune is played to switch the device on or off.
5 settings indicated by a number shown in the icon. 3.6 Tableau The Acuity contains a tableau on which you can place your reading material. The tableau can move from left to right and from front to back.
3.7 Brake Handle In front of the tableau of the Acuity you will find a single brake handle with which you can control the movement of the tableau. The handle has 4 positions: Left The tableau can be moved freely.
The Acuity contains an advanced menu with which you can (de)activate certain functions of the Acuity. You can access the advanced menu by ensuring the device is switched off, then holding the on/off button approx. 10 seconds until you see the following screen:...
Black - white* Black - yellow* nally activated White - black* Yellow - blue your Acuity. Green - black Blue - yellow* Please contact your High contrast Black - green* Red - black supplier if you want to make use of the...
Need help?
Do you have a question about the Acuity and is the answer not in the manual?
Questions and answers