Tripleplay Hardware - Fishman 3 triple play User Manual

TriplePlay Hardware

Installation overview. You'll be attaching both the TriplePlay controller and pickup to your guitar. This is
simply an overview of your options. See the online documentation for detailed instructions. Note that the
installation does require adjustment to your guitar. If you are not comfortable adjusting your instrument,
consider using a professional technician to complete your installation.
There are two ways to mount the controller:
Directly to surface of your guitar using a plastic mounting ring. This mount has adhesive on one surface
and magnets on the other. It remains on your guitar, and the controller attaches to it magnetically.
Using one of the included metal endpin brackets. You attach these by loosening your strap button, insert-
ing the bracket's tongue between the button and guitar body, and then re-tightening the screw. There's a
right-angled bracket for flat-topped guitars, and a slanted one for curved tops. The controller's magnetic
mounting ring attaches to the bracket with adhesive, but no adhesive touches your guitar.
There are also two ways to mount the pickup:
Directly to your guitar using a plastic mounting pad. The adhesive backed mounting pad attaches to your
guitar between the bridge and the bridge pickup, as close to the bridge as possible. We've supplied pads of
varying heights to accommodate most guitars. The pickup slides easily in and out of the mounting pad which
remains attached to your guitar.
Using the bridge bracket. On guitars with tune-o-matic bridges this bracket fits between the main bridge
assembly and the supporting screw posts. Adhere the mounting pad to the bracket and slide the pickup into
the mounting pad.
For detailed installation instructions please visit www.fishman.com/tripleplay.
11