Advertisement
additional servo connectors
for
the
newly
added
channels. These on-off or
two-state outputs manifest
themselves
several
ways
depending
upon
Receptor model. At 5A
capability each the ON-OFF
electronic switches can be
used
directly
for
many
functions even with devices
operating on an assortment
of voltages.
And the 8
conventional Servo Com-
mand Pulse outputs are a
handy and familiar way to
implement
mechanical
functions using conventional
servos.
The
KH716
complete
system has 7 conventional
servo
channels
and
independent
simultaneous
KeyKoder
ON-OFF electronic switch
channels for 23 channels total. The first 8 of the 16
KeyKoder channels coincidentally features 2 three-
position regular Servo Command Pulse outputs and
6 two-position regular SCP command outputs. The
KH716 system consists of: the complete Futaba
FP7CAP R/C set with the 7 channel FPR168DP or
other equivalent Futaba Brand receiver, VANTEC
KH16T KeyPad and KH16R Receptor and 2
servos. Additional servos available.
The KH732 complete system has 7 conventional
servo
channels
and
simultaneous KeyKoder ON-OFF switch channels
to yield 39 channels total. The first 8 of the 16
KeyKoder channels coincidentally feature 2 three-
position regular Servo Command Pulse outputs, 6
two-position regular SCP outputs. The KH732
systems consists of: the complete Futaba FP7CAP
R/C set, with the 7 channel FPR168DP or
equivalent Futaba brand receiver, VANTEC
KH32T KeyPad and KH32R Receptor and 2
servos. Additional servos available.
Generally the '716 & '732 versions are employed in
boats and robots. Up to 128 ON-OFF channels can
be added to a single Futaba Servo Channel with an
array of KeyKoders.
vantec.com Phone:(541)471-7135 FAX:(541)474-3987 460 Honeycutt Dr., Grants Pass, OR 97526
the
16
and
32
independent
and
The KH712 is specifically configured for model
aircraft applications. Switches 1 through 8 on the
KH16T KeyPad generate only Servo Command
Pulses and switches 13, 14, 15, and 16 are the only
electronic switch outputs on the KH12R Receptor.
The KH712 Hitchiker is perfect for 1/4 scale R/C
model airplanes with
channels for the normal flying functions and 12
added KeyKoder channels for a total of 19
channels. It's KeyKoder Receptor features 2 three-
position regular Servo Command Pulse outputs, 6
two-position regular servo command outputs, and 4
electronic switches. Since the servo command
outputs are just like the signals coming from a
Futaba receiver you can plug-in up to 8 new
conventional servos for auxiliary functions like
bomb bay doors, bomb release, or parachutists. The
electronic switches can be used to control engine
ignition, starting, lights and camera. The KH712
system consists of Futaba FP7CAP PCM R/C set
with an 8 channel receiver, VANTEC KH16T
KeyPad and KH12R Receptor and Servos.
TRANSMITTER / KEYPAD INSTALLATION:
The KeyPad is factory mounted to the Futaba case,
a slight modification made to the transmitter. You
cannot use the original trainer feature after these
modifications.
7 conventional servo
0410
Advertisement
