Advertisement
IMPORTANT! This product is designed to attach to most car seats. If, after attaching this product to your car seat you find that
you cannot properly tighten your car seat's restraint system (as described in the car seat manufacturer's instructions), DO NOT
use this product on the car seat.
Car Seat with Bolster
Dashboard
Clip
Car Seat
Bolster Fabric
• Position the dashboard upright with the horn facing baby.
• Fasten the clips on the underside of the dashboard to the
car seat bolster fabric, as shown.
Attaching the Dashboard to a Car Seat
Horn
Car Seat with 3-Point or
5-Point Restraint
Car Seat Restraint System
Before attaching the dashboard to your car seat's restraint
system, check to be sure the car seat restraint system is
securing your child properly. Check all restraint system
belts (shoulder, lap, crotch, etc.) by pulling on them. The
straps should not pull more than one inch (two fingers)
away from your child.
• Position the dashboard so that the horn is upright and
facing away from baby.
• Wrap the dashboard straps around the crotch strap (of the
car seat restraint system) and fasten.
3
Horn
Dashboard
Advertisement
