MicroLux 86908 User Manual

MicroLux 86908 User Manual

7-3/4" band saw

Advertisement

Quick Links

LIMITED WARRANTY

Micro-Mark guarantees this product to be free of manufacturing
defects for a period of 90 days from date of shipment, regardless
of the amount of time the product has been used and/or stored.
The product, or parts thereof, will be repaired or replaced (at our
option) and shipped back to you free of charge if the following
conditions have been met:
• the product is shipped back to us within the warranty period,
• incoming transportation charges have been pre-paid,
• proof of purchase has been provided, and
• our Service Department determines that the problem was
caused by a defect in material and/or workmanship.
Please return to Micro-Mark Product Service Dept. at the address
below with a note explaining the problem.
For products returned after the warranty period, our regular repair
charges shall apply. Please include your telephone number so
we may advise you of the repair estimate. Any product returned
to the purchaser without repair work being performed shall be
shipped C.O.D. for the return transportation charges.
This warranty does not cover damages resulting from improper
assembly, adjustment or maintenance, accident, alterations,
#86908
7-3/4" Band Saw
User's Manual
WARNING: To reduce the risk
of injury, the user must read and
understand the user's manual
before using this product.
normal wear, abuse or misuse, and does not apply where
products are used commercially. The warranty shall also not
apply when the product has been used for purposes beyond
those for which it was designed or unreasonable for its size.
Micro-Mark makes no other warranty of any kind whatever,
expressed or implied, and all implied warranties of merchantability
and fitness for a particular purpose which exceed the above
mentioned obligation are hereby disclaimed by Micro-Mark and
excluded from this warranty.
This warranty gives you specific legal rights and you may also
have other rights which vary from state to state. The obligation
of the warrantor is solely to repair or replace the products.
The warrantor is not liable for any incidental or consequential
damages due to such defect. Some states do not allow the
exclusion or limitations of incidental or consequential damages,
so the above limitations or exclusion may not apply to you.
If you have any questions, please contact our Product Service
Department by email: tech@micromark.com
Product Service Department
340 Snyder Avenue
Berkeley Heights, NJ 07922
MM041117

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 86908 and is the answer not in the manual?

Questions and answers

Summary of Contents for MicroLux 86908

  • Page 1: Limited Warranty

    #86908 7-3/4" Band Saw User's Manual WARNING: To reduce the risk of injury, the user must read and understand the user's manual before using this product. LIMITED WARRANTY normal wear, abuse or misuse, and does not apply where products are used commercially. The warranty shall also not...
  • Page 2: General Safety Rules

    GENERAL SAFETY RULES WARNING: READ ALL INSTRUCTIONS. Failure to follow all instructions listed below may result in electric shock, fire and/or serious personal injury. 1. KNOW YOUR POWER TOOL. Read this manual carefully. Learn the applications and limitations, as well as the specific potential hazards related to this tool. 2.
  • Page 3 GENERAL SAFETY RULES, CONTINUED 18. CHECK FOR DAMAGED PARTS. Before using the tool, visually inspect for any part that is damaged. Damaged parts must be properly repaired or replaced by an authorized service center to avoid risk of personal injury. Also check for alignment of moving parts, binding of moving parts, and any other conditions that may affect operation of the tool.
  • Page 4: Band Saw Features

    ELECTRICAL WARNING: Keep the extension cord clear of the working area. Position the cord so that it will not get caught on lumber, tools, or other obstructions while you are working with a power tool. Failure to do so can result in serious personal injury.
  • Page 5 BAND SAW FEATURES, CONTINUED SAW BLADE Blade tension control knob Saw includes a standard 1/4" blade. SCALE Door latch The scale and scale indicator show lock screw the angle or degree the saw table is tilted for bevel cutting. SWITCH AND SWITCH KEY Blade guard Your band saw has an easy access Switch...
  • Page 6 ASSEMBLY SAW TABLE ASSEMBLY Using the four bolts provided, attach the table to the trunnion, tightening the bolts after all four have been fitted. Once attached, position the 2-sided table insert into the square recess. The side of the insert with beveled edges should face upward when Saw table performing 45˚...
  • Page 7 SAW SET-UP Blade tension control knob WITH THE MACHINE UNPLUGGED, adjust the blade tension with the blade tension control knob on top of the upper housing. Turning the knob clockwise tightens the blade; turning the knob counter- clockwise loosens the blade. Note: When increasing the tension on a loose blade, be sure to keep the blade centered on the upper and lower wheels.
  • Page 8 SAW SET-UP, CONTINUED The upper and lower thrust bearings and guide pins should be set-up next. The thrust bearing should be about 0.5 mm behind the back of the blade. Adjust it and lock it place. Slacken the guide pin locking screws, then push the pins in until they touch the blade.
  • Page 9: Blade Change

    BLADE CHANGE Table not shown in picture for clearer view only; table does not have to be removed for blade change Band saw blades are sharp enough to cause injury even when too blunt to cut wood! It is recommended that protective gloves be worn when handling blades. Unplug the band saw from the power source, slacken off the blade tension and open the upper and lower housing doors with the aid of hex key provided.
  • Page 10: Parts Diagram

    PARTS DIAGRAM...
  • Page 11: Parts List

    PARTS LIST Description Description upper guide bar plate ball bearing sliding plate upper wheel upper guide bar upper wheel shaft frame assy. connecting shaft Frame seal cap split washer tension lever guide support assy. Rack U type support hex flange bolt butterfly spring shaft wing type nut butterfly spring...

Table of Contents