Advertisement
Quick Links
1.
substation (speaker)
Connect
station
, using Extension Wires (provided). Plug
POWER
to
on
2.
Terminal Connector
Connect
plug with two short RED and WHITE wires) to
station
, RED to terminal
power transformer
default channel. Press down main power button for 1 second to turn
system on, 3 seconds to turn off.
3.
Terminal Connector
Connect
master station
* Call (248) 629-0170 if you still have troubles setting up system.
®
QUICK START
POS master station
1
, BLACK to
to terminals
, using Extension Wires (provided).
HF-802A (version 2.0)
Page 1 of 4
Model HF-802A
OUT
POS master
to
on
power transformer
.
(provided in accessory bag, male
monitoring master
COM
next to it; Connect
"+"
"-"
and
. Channel 1 is the
REC
male end to
POS
on
Advertisement
Summary of Contents for Huafone HF-802A
- Page 1 Press down main power button for 1 second to turn system on, 3 seconds to turn off. Terminal Connector Connect male end to master station , using Extension Wires (provided). * Call (248) 629-0170 if you still have troubles setting up system. HF-802A (version 2.0) Page 1 of 4...
- Page 2 The two green indicator lights will be on. Two-way duplex communication is now established. Monitor, Talk-In, Record 1. Connect Monitoring Master Station to jack 12 (REC) on master station. Talk-in conversation cannot be HF-802A (version 2.0) Page 2 of 4...
- Page 3 MIC Input Sensitivity: 10 mv Working Humidity: ≤90% Working Temperature: - 4 ℉ ~ + 150 ℉ Note: Huafone reserves the rights to update pictures, specifications, design shown here at anytime without further notice. HF-802A (version 2.0) Page 3 of 4...
- Page 4 “Low” setting. Low Battery 1. Replace the Sensor batteries when the LED on the Sensor turns on. 2. Replace the Receiver batteries when the LED on the Receiver turns on. HF-802A (version 2.0) Page 4 of 4...
Need help?
Do you have a question about the HF-802A and is the answer not in the manual?
Questions and answers