Advertisement
Quick Links
Instruction Sheet
(Original Instructions)
Electric Screwdriver
270-BS2000E
270-BS3000E
270-BS4000E
270-BS4000FE
270-BS6000E
270-BS6500E
270-BS6800E
Declaration of Conformity CE
We (Kaisertech Limited) declare under our sole responsibility that the products Electric Screwdrivers
described under this manual are in conformity with the following Directives or Standardisation
documents: Machinery Directive 2006/42/EC
Advertisement
Summary of Contents for Kaisertech 270-BS2000E
- Page 1 270-BS3000E 270-BS4000E 270-BS4000FE 270-BS6000E 270-BS6500E 270-BS6800E Declaration of Conformity CE We (Kaisertech Limited) declare under our sole responsibility that the products Electric Screwdrivers described under this manual are in conformity with the following Directives or Standardisation documents: Machinery Directive 2006/42/EC...
- Page 2 Serial No.: _____ Kaisertech Industrial Electric Screwdriver User Manual (For full-automatic models-brushless motor with controller) Declaration of Conformity CE We (Kaisertech Ltd) declare under our sole responsibility that the products Electric Screwdrivers described under this manual are in conformity with the following Directives or Standardisation documents: Machinery Directive 2006/42/EC and EMC Directive 2004/108/EC A Word of Thanks to Our Customers Thank you for choosing this lightweight and powerful electric screwdriver. In order to ensure maximum performance and product life, please read through this manual before using your screwdriver. Feature • H igh precision, low inertia and low impact driving brushless motor giving long life and high quality.
- Page 3 This product comes supplied with a 5P power cord and two ¼” Hex bits. • B its 1/4” Hex (one set per screwdriver) please see chart. Bit specifications Available 1/4” ø5.0 Screwdriver Model Tip No. Tip diameter D Tip No. Tip diameter D ø1.7 7W3204 ø1.7 7W6204 270-BS2000E ø2.0 7W3404 ø2.0 7W6404 ø3.0 7W3644 ø4.5 7W6744 270-BS3000E ø2.5 7W3524 ø2.5 7W6524 ø3.0 7W3644 ø3.0...
- Page 4 Power supply Load Output Volume (mm) Weight Safety Model Voltage Voltage Feature Approved (AC) (DC) Length Width Height • Adjustable stepless APS- CB,CE,UL output 301A (CUL), voltage 100-240V 20-30V ROHS, • Available APM- REACH Input Voltage 301A 110-240VAC Read the instructions before use • U se the correct voltage: Carefully check the voltage shown on the power supply and this manual and determine the correct voltage. Only plug the unit into a power source of the correct voltage.
- Page 5 Personal safety • S tay alert, watch what you are doing and use common sense when operating a power tool. Do not use a power tool while you are tired or under the influence of drugs, alcohol or medication. A moment of inattention while operating power tools may result in serious personal injury. • P revent unintentional starting. Ensure the switch is in the off-position before connecting to power source and/or battery pack, picking up or carrying the tool. • C arrying power tools with your finger on the switch or energising power tools that have the switch on invites accidents. • R emove any adjusting key or wrench before turning the power tool on. A wrench or a key left attached to a rotating part of the power tool may result in personal injury. • D o not overreach. Keep proper footing and balance at all times. T his enables better control of the power tool in unexpected situations. • D ress properly. Do not wear loose clothing or jewellery. Keep your hair, clothing and gloves away from moving parts. Loose clothes, jewellery or long hair can be caught in moving parts. Power tool use and care • Do not force the power tool. Use the correct power tool for your application.
- Page 6 • B it insertion: Use your finger to depress the slide sleeve into the screwdriver and insert an appropriate bit. When the slide sleeve is released, the bit will be automatically engaged. Note: Do not hammer the bit in or pull it out forcibly. The illustration of insertion of bits Picture 1 Picture 2 Picture 3 • S ecure screwdriver during operation: During operation hang the screwdriver up securely (as from the Kaisertech T ool Balancer) in order to prevent it from being knocked down and suffering external cracking, internal damage, or a snapped power cord. • W hen the selected torque is reached: T his product features an internal clutch assembly. When a screw is driven and the selected torque is reached the clutch assembly will automatically disengage and a ‘click’ will be heard. At this point even if the ‘forward’ trigger is not released the power to the motor will be automatically cut off.
- Page 7 Note: When driving screws grasp the screwdriver firmly in order to prevent upwards recoil generated by the clutch release from forcing the screwdriver bit edge from the screw slot and damaging slot. • W hen removing screws: When a previously driven screw cannot be removed using the same torque that it was driven with, raise the torque setting. After the screw is removed return the regulating handle to its original setting. T o simplify this operation note the number ‘click’ sounds generated as the regulating handle is turned. • O perational frequency: Duty cycle 0.5s/3.5s (ON/OFF). T otal screws 7000pcs/8hours. If every day work is more than 8hours please use two screwdrivers in turns to protect the life of screwdrivers. • O verloading Operation: If the operator discovers overheating or the revolutions plunging rapidly while screwing it means that the screwdriver is overloaded. Please change the torque screwdriver in higher horsepower or reduce the frequency of screwing to prolong the lifespan of the screwdriver.
- Page 8 We provide a one-year free repair service warranty with this product. The warranty is valid for one year from the date of purchase. However, for following circumstances we will charge the user for any parts and labour cost associated with repairs. • F or repairs involving normal wear to parts including bits, power cord and also to the exterior surface. • F or screwdrivers connected to a power source of the incorrect voltage. • F or inappropriate use or an attempt to repair the unit by the user. Kaisertech Ltd Unit 12, M3 T rade Park, Manor Way, Eastleigh,...
Need help?
Do you have a question about the 270-BS2000E and is the answer not in the manual?
Questions and answers