Avocor AVC-SB1 Soundbar with HDMI and Bluetooth aptX™ CONTENTS IMPORTANT INFORMATION ___________________________3 WHAT’S IN THE BOX __________________________________5 KEY FEATURES _______________________________________6 INSTALLATION _______________________________________7 SETUP INSTRUCTIONS (Hookup guides) _______________10 CONTROLS & FUNCTIONS ___________________________12 REMOTE CONTROL _________________________________13 WARRANTY ________________________________________14 TROUBLE SHOOTING ________________________________15 SPECIFIATIONS _____________________________________16...
IMPORTANT INFORMATION READ BEFORE OPERATING EQUIPMENT Follow all the instructions carefully before using the Avocor AVC-SB1 soundbar and keep them for future reference. Do not use this Avocor AVC-SB1 soundbar near water. Clean only with a dry soft cloth and unplug this soundbar from the wall outlet Do not block any ventilation openings.
Page 5
POWER SOURCES This audio system is designed to operate on 230 volts 50Hz, AC current. The main plug is used as the disconnect device and should remain readily accessible. To prevent electric shock, do not use the soundbar’s mains cable with an extension cord, receptacle, or other outlet unless the blades and ground terminal can be fully inserted to prevent blade exposure.
KEY FEATURES The AVC-SB1 Soundbar is designed to provide a high quality alternative to the loudspeakers in your Interactive display. To this end it has HDMI inputs, optical digital, analogue, and Bluetooth aptX inputs. The Bluetooth input allows you to stream music content direct from your mobile, laptop or tablet wirelessly, straight to the AVC-SB1 Soundbar.
WALL MOUNTING DETERMINE HOW YOU WANT TO SET UP YOUR AVC-SB1 SOUNDBAR. The AVC-SB1 Soundbar comes with wall fixings to be used with a wall mounted Interactive Display. The inputs and power cord are designed to allow a flush mount.
INTERACTIVE DISPLAY TV/DVD/SET TOP BOX HOOKUP - CASE 1 HDMI ARC HDMI with ARC - Use this output to connect your AVC-SB1 to your Interactive Display/TV. Please note if your TV is not ARC (Audio Return Channel) enabled you will not be able to connect this way - if this is the case, please refer to either case 2 or 3 below.
Page 12
If your Interactive Display/TV has a headphone output, plug a 3.5 mm mini stereo cable into the headphone output from your Interactive Display/TV and plug the other end to the Input 2 jack on the back of your AVC-SB1. IMPORTANT SET UP NOTE...
Press this button to scroll through the inputs. POWER BUTTON Press this button to turn the AVC-SB1 Soundbar on; the Power indicator will turn off to indicate the AVC-SB1 Soundbar is on. If the input becomes inactive the AVC-SB1 Soundbar will change to standby mode to conserve power and this indicator will illuminate.
REMOTE CONTROL POWER MUTE Press this button to turn the Press this button when AVC-SB1 Soundbar on or you want to activate off. the audio mute. Press it again to deactivate the mute function. VOLUME Press the + or - button to...
WARRANTY This Avocor AVC-SB1 soundbar had been designed and manufactured to the highest quality standards; however, should you encounter any problems with this soundbar please contact your local dealer. This warranty is valid for the original owner for a period of one year from the date of purchase, it is not transferable.
The L/R Audio in or 3.5mm jack is disconnected or when there is no input signal or the input signal is too low. If using the 3.5mm jack input to AVC-SB1, we recommend to default the output volume at 75% or above on the external devices to ensure that it does not automatically go into standby mode.
Soundbar wall mount kit Soundbar interactive flat panel mount kit Avocor reserves the right to change specifications without notice. 44[Type here] [Type here] [Type here] Images and photos are for illustration only and actual soundbar may vary. E&OE.
Need help?
Do you have a question about the AVC-SB1 and is the answer not in the manual?
Questions and answers