Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for FDS FD600CAM-2
- Page 1 Revision Date: Rev: Document Number: 07/11/2017 MAN – FD600CAM-2 (VER 28V) Page 1 of 11 Installation and Operation Manual FD600CAM-2/FD600CAM-2 Ver 28V Glareshield Camera © 2017 FDS Avionics Corp. TECHNICAL SUPPORT All Rights Reserved. 470-239-7421 or FDSAvionics.com...
-
Page 2: Table Of Contents
Revision Date: Rev: Document Number: 07/11/2017 MAN – FD600CAM-2 (VER 28V) Page 2 of 11 Table of Contents General Information ...................... 3 Front View ........................3 Specifications ........................ 3 Installation Instructions ....................4 Power ..........................4 Wiring Suggestions ....................... 4 Composite Wiring ...................... -
Page 3: General Information
Page 3 of 11 General Information The FD600CAM-2 and the FD600CAM-2 Ver 28V are Glareshield Cameras. This small color camera, when mounted in the cockpit, will provide passengers with an opportunity to observe taxi, take-off, and landing, adding a whole new dimension to the In-Flight... -
Page 4: Installation Instructions
2/3 of the way up the video screen in the cabin. Power The FD600CAM-2 is a 12VDC camera that requires 90mA power and can operate at 9 - 15VDC. The FD600CAM-2 Ver 28V is a 28VDC camera that requires 45mA power and can operate at 15 - 29VDC. -
Page 5: Composite Wiring
Revision Date: Rev: Document Number: 07/11/2017 MAN – FD600CAM-2 (VER 28V) Page 5 of 11 Composite Wiring Recommended cable for s-video/composite and audio purposes is PIC 75 Ohm Coax, P/N V76261. This is a lightweight, flexible, and low signal loss cable which meets FAA flammability requirements of FAR 23.1359(d), FAR 25.853(a) and FAR 25.869(a)(4). -
Page 6: Power & Ground Wiring
Revision Date: Rev: Document Number: 07/11/2017 MAN – FD600CAM-2 (VER 28V) Page 6 of 11 Power and Ground Wiring The rated current of the equipment and associated voltage drop should be taken into consideration when selecting wire gauge. The following example is based on an install with a 28VDC power system, 1.5-amp equipment load and a total of 50 feet of wire... -
Page 7: Power/Video
Revision Date: Rev: Document Number: 07/11/2017 MAN – FD600CAM-2 (VER 28V) Page 7 of 11 Power/Video Standard Density DB-9 Receptacle (supplied) Connector P/N: M24308/2-281 or Equivalent Crimp Contacts P/N: M39029/63-368 or Equivalent FD600CAM-2 FD600CAM-2 Ver 28V Description Description Number 12VDC Power... -
Page 8: Technical Drawing
Revision Date: Rev: Document Number: 07/11/2017 MAN – FD600CAM-2 (VER 28V) Page 8 of 11 Technical Drawing © 2017 FDS Avionics Corp. TECHNICAL SUPPORT All Rights Reserved. 470-239-7421 or FDSAvionics.com... -
Page 9: Technical Support
For further product information, technical data and sample wiring diagrams, please click on the Dealers section of our web site at www.FDSAvionics.com Instructions for Continued Airworthiness The FD600CAM-2 and the FD600CAM-2 Ver 28V is designed not to require regular general maintenance. © 2017 FDS Avionics Corp. TECHNICAL SUPPORT All Rights Reserved. -
Page 10: Warranty
Limited Warranty All FDS Avionics Corp. products are warranted to be free from material or manufacturing defects for a period of 24 months from the date of shipment for General Aviation customers or 12 months from the date of shipment for Government/Special Mission customers. -
Page 11: Log Of Revisions
Updated camera lens specs, added operating temperature to 09/05/08 spec list 04/14/2009 Updated specifications, warranty info Added FD600CAM-2 Ver 28V, new Composite Wiring info, new 03/16/2011 Pinout info, new Technical Drawing 07/11/2017 New Format, New Company Name, Warranty © 2017 FDS Avionics Corp.