Advertisement
Quick Links
Advertisement
Summary of Contents for Fluxamp FLX13000
- Page 1 Jump Starter Battery Pack FLX13000...
- Page 2 Thank you for choosing the FLUXAMP Jump Starter model FLX13000. Always follow basic safety precautions when using electronics or jump starting a vehicle. Read all instructions carefully. Please keep this instruction manual for easy reference or you can download an electronic...
- Page 3 A clean terminal will provide the best conductivity between your clamps, Do not attach clamps to FLX13000 yet! First, securely attach the black clamp to the vehicle's negative (-) battery terminal, then the red clamp to the vehicle's positive (+) battery terminal.
-
Page 4: Operation Guide
Operation Guide: Indicator Lights The FLX13000 Jump Starter has 5 indicator lights to determine the amount of power in the unit. • Press the on/off switch to activate the lights. The display as below shows the level of power in relation to the number of lights illuminated. - Page 5 The unit will fully charge in approximately 4 hours. • Charging a Phone, Tablet or Other USB Devices The FLX13000 Jump Starter comes with two USB discharging port located at the side of the unit: • Select appropriate connector and connect it to your smartphone, tablet or USB device you want to charge.
-
Page 6: Important Safety Information
FLUXAMP is not responsible. • Always read all instructions carefully before using your FLX13000 Jump Starter. Do not submerge your FLX13000 Jump Starter in water, or expose it to rain or mois- • ture. •... - Page 7 If any corrosive liquid comes in contact with your skin or eyes, imme- diately wash with running water and consult a doctor. • Your FLX13000 must be disposed of properly when it is no longer able to be used. You need to recycle your lithium-ion battery at a local facility. •...
-
Page 8: Troubleshooting
How many USB devices can the FLX13000 Jump Starter charge at once? FLX13000 has 2 x 2.1A USB port , it can charge 2 x iPad at the same time. What is the lifespan of the FLX13000 Jump Starter? The FLX13000 Jump Starter can be fully charged and discharged up to 1000 times under ideal conditions. - Page 9 You could have experienced a reverse polarity and blown the safety diode on your clamp. To order a new set of clamps, please visit www.FLUXAMP. com/contact. I connected my portable device to my FLX13000 with a USB, but it will not charge. •...
-
Page 10: Parts List
I connected my FLX13000 to the charger, but there are no indicator lights blinking. • Check that the charger is securely attached to the FLX13000 input port. • You may have a faulty outlet. Try plugging your FLX13000 charger into an alternate •... - Page 11 FLUXAMP. FLUXAMP shall not In any way be liable to you or any third party for any damages you or any third party may suffer as a result of use, Intended or unintended, or misuse of this product in conjunction with any device, equipment or accessory other than the appropriate device or equipment for which this product is designed.