Table of Contents
Advertisement
TMa550.book Page 70 Wednesday, October 3, 2001 10:57 AM
70
3
Press Enter.
After setting the password, the computer sets the User Password
parameter to "Set".
4
If desired, you can opt to enable the Password on boot parameter.
5
When you are done, press F10 to save the changes and exit the
BIOS Setup Utility.
Removing a password
Follow these steps:
1
Use the
and
and press the Enter key. The Set Password box appears:
2
Type the current password in the Enter Current Password field and
press Enter.
3
Press Enter twice without typing anything in the Enter New
Password and Confirm New Password fields.
The computer then sets the User Password parameter to "Clear".
4
When you are done, press F10 to save the changes and exit the
BIOS Setup Utility.
Changing a password
Follow these steps:
1
Use the
and
and press the Enter key. The Set Password box appears:
2
Type the current password in the Enter Current Password field and
press Enter.
3
Type a password in the Enter new password field.
Retype the password in the Confirm new password field.
keys to highlight the Set User Password parameter
Set Password
Enter Current Password
[
Enter New Password
[
Confirm New Password
[
keys to highlight the Set User Password parameter
Set Password
Enter Current Password
[
Enter New Password
[
Confirm New Password
[
5 Software
]
]
]
]
]
]
Advertisement
Table of Contents
