Download Print this page

K9 SAPPHIRE User Manual

Sonic & vibration bark collar

Advertisement

Quick Links

"SAPPHIRE" BARK CONTROL COLLAR
USER GUIDE

Advertisement

loading

Summary of Contents for K9 SAPPHIRE

  • Page 1 “SAPPHIRE” BARK CONTROL COLLAR USER GUIDE...
  • Page 2 SAPPHIRE SONIC - VIBRATION BARK COLLAR Congratulations on buying this Our K9 Bark Collar, if for any reason you are not 100% completely satisfied with your Bark Collar, please contact me immediately so that I may help you.. Once you have been through the users manual and watched all the videos if you are unsure about anything, Please contact me at help@ourk9.com.
  • Page 3 WHAT THE BARK COLLAR ACTUALLY DOES WHEN YOUR DOG BARKS Our K9 Vibration Bark Collar can be adjusted to control the sensitivity of your dogs bark, according to the size of your dogs bark Sonic GREEN LIGHT 1.5 second Sonic Blast GREEN LIGHT 1.5 second Sonic Blast...
  • Page 4 Putting the Collar on Your Dog: Switch the Collar off so the collar has been disabled. And adjust to the correct length, (there is a short video to help you if needed) the prongs MUST be against your dog's skin to work, and the Hole MUST be free of any Obstruction.… If for any reason you took your collar apart and are unable to put your collar together correctly please watch the video provided, When the collar has been assembled correctly the collar DOES NOT SLIP, IT WILL NOT...
  • Page 5 Now leave the collar on your dog, Do Not switch the collar on…. Wait for 24 – 48 hours until your dog totally ignores the collar, initially they will scratch at it and just paw at it, when that completely stops we are ready to start the training. Remove the collar from your dog, you must be prepared to stay when you switch on the collar for the first time and start the training...
  • Page 6 Just hold it up with the back of the collar facing you, there is a small hole between the two prongs, just puff into the hole and the collar will make a beep sound, do it again, and the collar will again make the another beep sound. Now do it a third time and the collar will make the beep sound again, and then vibrate.
  • Page 7 Now we are going to start the Training, under no circumstances should you just put the collar on your dog and leave it them to figure out, your dog will get confused and extremely upset. You MUST teach them what you expect from them. Now please watch the training video, Remember every time your dog barks you give the command NO the collar will rein- force that command…...
  • Page 8 WHAT THE LIGHTS ON THE COLLAR MEAN No Lights - Collar is in Sleep Mode Green Flashing Light - Collar is in Stand By Mode Green Solid Light - Collar is in Working Mode Red and Green Lights Flashing - Collar is in Reset Mode this will Last for 1 Minute HOW TO TURN ON / OFF YOUR COLLAR To Turn On your collar - Hold down the On/Off button for a...
  • Page 9 Caution Notes: 1.You Must Remove the Collar Daily, Clean and gently massage your dogs neck . Because the collar is quite tight you must remove it daily to avoid any likelihood of your dog developing any pressure sores 2. When Charging the Collar…. You must gently remove the rubber cover to access the Mini USB Socket, When you have finished charging the collar you MUST replace the Rubber Cover Correctly.
  • Page 10: Fault Finding Guide

    My Dog Shakes his Head and the Collar Goes Off Did You Follow the Guidelines in the Video “How to Use Your Our K9 Vibration Collar Correctly” About NOT turning the collar for One to Two Days BEFORE Your Start Training? Because the Collar Feels Unusual to Your Dog They Will Keep Shaking Their Heads and scratching forcing the Collar to Activate…...
  • Page 11 My Dog Barks But the Collar Does Not Activate... FOUR POSSIBLE REASONS A 1. Dead Battery - Check the Battery by Performing a Full Test. Refer Page 3 A 2. Sensitivity is set up Wrong. Adjust Sensitivity. Ref Page 5 A 3.