Table of Contents
Advertisement
5.3.4. After completing the steps as the above, switch the AC input
button to "1". The fan starts turning, and the LEDs red and
yellow are on means the charger works normally. For the
exceptional, please turn off the charger instantly and repeat
step 1-4 and restart it.
5.3.5. The cross-blink between Led yellow and Led green is normal
while the charger is fully charged and the Led green is stable
on.
5.4.usage environment： ： ： ：
5.4.1. Keep the charger and other objects above 5cm to reduce the
heat.
5.4.2. Do not use it on the wet and dirty place.
5.4.3. Do not put charger on the battery.
5.4.4. Prevent charger from shock.
5.5. Note:
5.5.1. Check the ground wire well for safety if the input wire of
charger is equipped with ground wire.
5.5.2. Check if the output-DC voltage corresponds to the battery
type and voltage. Wrong voltage and battery type would
explode the battery and wound the users.
5.5.3. Switch off the charger to "O" position before connecting the
charging wire and battery.
5.5.4. Avoid exposing charger in rain, water and damp conditions.
5.5.5. Contact the sales agent when the charger stays in yellow
after charging more than 12 hours.
P17
Advertisement
Table of Contents
