Table of Contents
Advertisement
&
Programming with 'SHOWVIEW'
All the information required for programming is encoded in the 'SHOWVIEW' code.
1
SV/V+
Press the
button on the remote control.
2
Enter the entire 'SHOWVIEW code'. This code (up to 9 digits) is found next to the start time of
a TV programme in your TV guide.
If you entered an incorrect code number, clear it with the
3
If you want to repeat programming at daily or weekly intervals, select the required settings in
the 'DAILY/WEEKLY' line.
'Daily' programming can only be used for recordings to be made from Mondays to Fridays
inclusive.
4
After confirming the corresponding data appears on the TV screen.
Note: If you use SHOWVIEW for the first time, the 'PROGRAMME NR.' line appears when you
enter the SHOWVIEW code. Enter the required programme number for this channel.
c
DATE DW PR START END
01
01 17:15 18:45
v w
0-9
OK
5
Confirm with the
OK
button.
The data has been stored in a TIMER block.
Please ensure that you loaded a cassette without erase protection.
STANDBY m
6
Press the
button.
CLEAR b
button.
How to enter, check or clear a TIMER-block manually
TIMER k
1
Press the
button.
2
Select a free TIMER block or the TIMER block you want to check or clear.
CLEAR b
3
Clear: Press the
button.
D
C
4
Enter/Check: Press the
or
button to switch between 'DATE' (date), 'DW' (daily,
weekly), 'PR' (programme number), 'START' (start time) and 'END' (end time).
A
B
Press the
and the
or the
5
To end programming, press the
MENU
STANDBY m
6
Press the
button.
Selecting a TV channel
Select the required TV channel (= programme number) with the
buttons on the remote control.
The selected programme number (e.g.: 'P 01') appears in the upper right corner of the TV screen.
Volume control
Sp
You can control the volume level with the
If you want to mute the sound temporarily (e.g.: during a telephone call), press the
button on the remote control. When you press it again, the sound returns at the same volume level.
Picture control
You can control brightness, contrast, sharpness and colour here.
MENU
1
Press the
button.
2
Select and confirm the line 'PICTURE'.
3
Select and confirm the TV screen setting.
* In addition, you can adjust the tint for the playback of cassettes in the NTSC standard.
0-9
buttons to change the data.
button.
P p
button or the
button.
MUTE y
0-9
Advertisement
Table of Contents
