Table of Contents
Advertisement
3
Select 'SLEEPTIMER' line.
D
4
With the
or the
the minutes left until switch off in 15 minutes intervals.
When you set the time to '0' with the
sleep function is switched off.
5
MENU
Press the
button.
Switch set on function
You can programme your set to switch on at a predetermined
time.
1
MENU
Press the
button.
2
Select and confirm the 'FEATURES' line.
3
Select and confirm the 'ON TIMER' line.
4
Determine the time you wish the set to switch on.
5
Select the 'WAKE UP' line and switch the 'on-timer' on or
off.
6
MENU
Press the
button.
Child lock
1
MENU
Press the
button.
2
Select and confirm the 'FEATURES' line.
3
Select the 'CHILD LOCK' line.
4
Switch the child lock on or off.
5
MENU
Press the
button.
Note: If a button is pressed with the child lock 'on',
'CHILD LOCK' appears for a few seconds in the display.
* Programmed recordings are made despite the child
lock and cannot be interrupted.
C
button you can determine
CLEAR
button the
Manual channel search
In certain cases the Automatic channel search may not be
able to find all of the TV channels (e.g.: coded TV channels).
You can then use this manual method to set the channels.
1
Switch on the set with the
D
menu buttons
and
2
Select and confirm the 'MANUAL STORE' line.
MANUAL STORE
CHANNEL/FREQ.
SEARCH
FINE TUNING
PROGRAMME NR.
DECODER
STORE
3
Select the 'SEARCH' line.
4
C
Press the
button as often as necessary, until you
have found the right TV channel.
Note:
* If you want to allocate a decoder, switch the decoder
function on or off with the
'DECODER' line.
* If you want to change the automatic channel setting,
select the 'FINE TUNING' line.
D
C
With the
or
matic TV channel setting.
Important: This re-tuning is only necessary and useful in
special cases, e.g.: when there are stripes on the
picture with cable-TV systems.
5
In the 'PROGRAMME NR.' line use the
select the required programme number, e.g.: 'P 01' .
6
Select and confirm the 'STORE' line.
7
If you want to search for further TV channels, start again
4
at step
.
MENU
To finish, press the
STOP h
button. Press the
C
simultaneously.
v w
C-21
1
D
C
or
button in the
button you can vary the auto-
P p
button to
button twice.
9
Advertisement
Table of Contents
