Using The Remote's Vcr Buttons - Philips Magnavox TS3659C1 Instructions For Use Manual

U
W hen using the TV remote
with a VCR, first make cer-
tain it is set to control your VCR
(using the Direct Access or
Search method).
BEGIN
Set the TV/VCR/ACC mode
switch to VCR on the remote.
Point the top of the remote
toward the front of the VCR
(remote sensor window) when
pressing the buttons.
VCR SYSTEM SWITCH
Set in the VCR position to send
remote commands to the VCR.
VCR RECORD BUTTON
Hold down the VCR/RECORD
button and the PLAY button to
begin a VCR recording.
PLAY BUTTON
Press to begin playback of a
video tape.
REWIND BUTTON
Press to rewind tapes. For some
VCRs, the STOP button may
have to be pressed first, then
REWIND. In playback mode,
press or press and hold the button
to view the picture moving rapid-
ly in reverse.
STOP BUTTON
Press to stop the motion of a tape
during playback, rewinding, fast
forwarding, etc.
S H
MART ELP
Remember, the VCR but-
tons on the remote will not
operate your VCR if those features
are not found on your VCR remote
control.
Note: All VCR functions (particularly
Search, Rewind, Fast Forward, etc.)
will operate the same as with the orig-
inal VCR remote control provided
with the VCR.
R
SING THE EMOTE
SLEEP
AV
TV
VCR VCR
RECORD
ACC
SMART
SOUND
MENU
VOL
' VCR B
S UTTONS
POWER
STATUS/EXIT CC TV/VCR-CLOCK
INCREDIBLE MULTI A/CH
STEREO MEDIA
SMART
PICTURE
SURF
CH
MUTE
41
POWER BUTTON
Press to turn the VCR ON and
OFF.
(CLOCK)TV/VCR BUTTON
Press to select VCR position
(VCR indicator on the front of
the unit will light), to view the
playback of a tape, to watch a
program while recording it, or to
watch a TV broadcast using the
VCR CH +, – or Numbered but-
tons. Press again to place in the
TV position (VCR indicator light
will go off) or to view one pro-
gram while recording another
program.
NUMBER BUTTONS
Press buttons for direct VCR
channel selections.
PAUSE BUTTON
Press to temporarily stop the tape
during playback or recording.
Press again to release Pause.
FAST FORWARD BUTTON
Press to rapidly advance the tape.
For some VCRs, you may need
to press the STOP button first,
then the FAST FORWARD but-
ton. During playback, press or
press and hold the button to view
the picture moving rapidly in the
forward direction.
CHANNEL + & – BUTTONS
Press to scan up or down through
the VCR channel numbers.