1. Manuals
  2. Brands
  3. MODOS Manuals
  4. Control Systems
  5. ONE
  6. Installation manual

MODOS ONE Installation Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MOD OS o ne
INSTALLATION MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ONE and is the answer not in the manual?

Questions and answers

Summary of Contents for MODOS ONE

  • Page 1 MOD OS o ne INSTALLATION MANUAL...
  • Page 3 Welcome to the MODOS family This guide provides steps on how to set up your MODOS one.

  • Page 4: Table Of Contents

    1. SAFETY AND HANDLING 2. OVERVIEW Components Contents Before you start 2: SETUP Installation instructions 3: CABLING MODOS one connector diagram Connecting cables to the MODOS one 4: CONFIGURATION 5: TECHNICAL DATA 6: SERVICE AND SUPPORT 7: PRODUCT MARKINGS & OTHER INFORMATION...

  • Page 6: Safety And Handling

    Power: Your MODOS one has no on/off switch. To disconnect your MODOS one from power, unplug the power lead. When connecting or disconnecting your MODOS one, always hold the plug by its sides. Keep fingers away from the metal part of the plug.
  • Page 7 Do not place naked flame sources, such as lighted candles, on or near your MODOS one. Do not use your MODOS one near water. Do not expose your MODOS one to dripping or splashing. Do not move your MODOS one if cables are connected to it.
  • Page 8 MODOS one. Use with medical-grade equipment: The MODOS one has not been tested for use as a controller for medical-grade equipment, and as such should not be used to control monitoring equipment and other sensitive devices.

  • Page 10: Overview

    The MODOS one is a sophisticated room management device that connects and controls all elements in a room. Your new MODOS one consists of three parts: the front cover, the electronics, and the wall mounting plate. In the following section we will...
  • Page 11 MOUNTING PLATE, COVER CLIPS, ELECTRONICS...

  • Page 12: Contents

    CONTENTS Here’s what’s in the box: Case & faceplate Mounting plate & electronics Power supply Cable ties & clips Manual...

  • Page 14: Before You Start

    MODOS one on the wall. REMOVING THE COVER To open the MODOS one, unscrew the securing screw located at the bottom of the unit. The cover can then be rotated counter-clockwise and removed to expose the contents.

  • Page 16: Installation Instructions

    2. SETUP INSTALLATION INSTRUCTIONS...
  • Page 17 Step 1: Using a level, align the mounting plate against the wall so that the two horizontal guide holes are level.
  • Page 18 Step 2: Use a pencil to mark the points where the holes will be drilled for the mounting screws.
  • Page 19 Step 3: Remove the mounting plate from the wall and use a 3mm drill bit to drill the mounting holes, using wall anchors where necessary.
  • Page 20 Step 4: Using pan-headed screws, affix the mounting plate to the wall. Do not use screws with tapered heads, as this can damage the mounting plate.
  • Page 21 Step 5: Insert the cable ties through the mounting clips and leave them open for now - they are used for cable management in the next steps.
  • Page 22 FOR CABLE-ON-WALL INSTALLATION: Step 6: Plug in the power, HDMI, and ethernet cables, using the cable ties to securely route the cables to the cable exit hole.
  • Page 23 FOR CABLE-ON-WALL INSTALLATION: Step 7: Using a flat-head screwdriver, press down on the terminal connectors and inser the wires into the MODOS one board. Route the cables through the cable ties as necessary.
  • Page 24 FOR CABLE-IN-WALL INSTALLATION: Step 6: Plug in the power, HDMI, and ethernet cables, using the cable ties to securely route the cables to the cable exit hole.
  • Page 25 FOR CABLE-IN-WALL INSTALLATION: Step 7: Using a flat-head screwdriver, press down on the terminal connectors and inser the wires into the MODOS one board. Route the cables through the cable ties as necessary.
  • Page 26 Step 8: Place the cover on the mounting plate, and turn it slightly to lock it in place.
  • Page 27 Step 9: Use a hex key to secure the cover in place using the screw at the bottom of the case. The MODOS one is now safely mounted on the wall.

  • Page 28: Modos One Connector Diagram

    3. CABLING MODOS ONE CONNECTOR DIAGRAM +5V output : RS-232 input #1 : GND, Tx1, RS-232 input #2 : GND, Tx2, Digital input/output : IO1 - IO10 Analogue input/output : A1 - A4 DMX output : GND, DMX-, DMX+ External power supply input : EXT,...
  • Page 29 RS-232(2) RS-232(1)

  • Page 30: Connecting Cables To The Modos One

    CONNECTING CABLES TO THE MODOS ONE Step 1: Insert the ethernet, power, and HDMI cables into the proper jacks on the MODOS one board. Ethernet jack Power jack HDMI cable...
  • Page 31 ETHERNET POWER HDMI...
  • Page 32 5V output: • and a connector to power external devices requiring 5V. • The MODOS one board can supply up to 490 mA total across all connectors. Using an external power supply: • Set the 5V/EXT switch to...
  • Page 33 DIGITAL RS232 SWITCH Example connections for a digital switch, RS-232, EXT/5V and DMX switch detail...
  • Page 34 500 m, and the DMX+/DMX- wires should be paired in the cable. Serial (RS-232): • The MODOS one board offers two RS-232 ports for controlling devices using serial RS-232 communication. • To connect an external device to the MODOS one:...
  • Page 35 ANALOGUE SWITCH Example connections for an analogue switch...
  • Page 36 5V position. When the switch is in the position, the voltage level of the IO connectors will match the source voltage of the external power supply connected to the MODOS one. Using switches/analogue sensors with different input voltages will require external voltage level conversion.

  • Page 38: Configuration

    4. CONFIGURATION The technician installing your MODOS one system will use the technician setup guide to configure the various connected devices in your room. You can find the latest version of the technician setup guide at www.modos.dk/downloads.

  • Page 40: Technical Data

    5. TECHNICAL DATA Model MODOS one v0.5 General specifications Dimensions (diameter x depth) 179 x 41 mm Weight 750 g (wood), 900 g (glass) Power 5V DC Operating temperature 0 - 40 ºC Operating humidity 0 - 80%, no condensation...
  • Page 41 DIMENSIONS ALL DIMENSIONS IN MM...

  • Page 42: Service And Support

    6. SERVICE AND SUPPORT If you need help with installing your MODOS one or configuring it, visit our website at www.modos.dk/support to get access to guides, videos, and more.

  • Page 44: Product Markings & Other Information

    7. PRODUCT MARKINGS & OTHER INFORMATION MODOS Aps. declares that the MODOS one complies with the essential requirements and other relevant provisions of directives 2014/30/EU EMC, 2014/35/EU Low Voltage, 2011/65/EU ROHS, and the WEEE directive. PRODUCT DISPOSAL In order to help reduce the impact of electronic waste on the environment, the MODOS one requires specialised disposal.
  • Page 45 7500 Holstebro Denmark www.modos.dk The MODOS logo is a trademark of MODOS Aps. Using the MODOS logo for commercial purposes without prior written consent from MODOS may constitute trademark infringement and unfair competition and be in violation of Danish law.

Table of Contents