Philips Magnavox CCA132AT Owner's Manual page 35

Checking or Clearing Timer Recordings
1
With the TV/VCR on, press the MENU button.
2
Press the PLAY/ button or the STOP/
VCR PROGRAM, then press the F.FWD/B button.
3
Press the PLAY/ button or the STOP/
PROGRAM REVIEW, then press the F.FWD/B button.
The timer recording information for the program in the lowest
numbered position will appear on-screen. If no timer recordings
are programmed, nothing will happen when you select PROGRAM
REVIEW and press the F.FWD/B button.
4
Press the F.FWD/B button to display information about
the next programmed timer recording. (If you do not press
a button within 10 seconds, information about the next pro-
grammed timer recording will appear.) This will continue until all
positions have been displayed. Then, the menu will disappear. You
can exit the Program Review at any time by pressing the STA-
TUS/EXIT button.
5
To cancel the timer recording displayed, press the
CLEAR button. Either the display will disappear or information
about other timer recordings will appear. If you do not press any
other buttons, the display will disappear after all timer recordings
have been displayed.
6
Repeat steps 1 - 4 to make sure you have cleared the
correct position.
Timer Recording (cont'd) 35
button to select
1
button to select
2-3
POWER SLEEP
4
PLAY
REW F.FWD
STOP
5
STATUS/EXIT
1 2 3
CH.
4 5 6
7 8 9
VOL.
0
ALT. CH
SPEED MEMORY PAUSE/STILL
REC/OTR TRACKING MUTE