Advertisement
Table 1 - Daugherboard Configuration and Sensing Geometry
Device
TSL230RD
TSL235R
TSL237S
TSL237T
TSL245R
TSL238D
Any of the six daughterboards may be installed in either of the sockets A or B. To install a
daughterboard, align the connector on the bottom of the daughterboard with either of the sockets A
or B. Note that the connector is polarized and the daughterboard should be inserted such that the two
mounting holes in the corners opposite the side with the connector align over the threaded standoffs
on the motherboard. Press firmly over the connector to make sure that the daughterboard is seated
firmly in the socket. As explained earlier, the PC host application will recognize which daughterboards
are installed and invoke the appropriate windows inside the main application window. Optionally the
daughterboards may be held in place with 3/16" 4-40 machine screws inserted through the two
mounting holes into the threaded standoffs.
An Evaluation System for the TAOS Light-to-Frequency Converters
LED
Configuration
N/A
Red
Transmissive
Red
Transmissive
Infrared
Reflective
Infrared
Reflective
Infrared
Reflective
3 of 10
Geometry
N/A
Vertical
Horizontal
Horizontal
Vertical
Horizontal
Vertical
www.taosinc.com
Advertisement
