Delta Elec. Inc.
6-2. Calibrate Analog YUV
Equipment: VG828, must be take off H/V sync terminal from machine
Step 1: In Service Mode select ADC Calibration - YUV. In this menu input pattern with 75﹪SMPTE
Input Pattern
Step 2 : After complete the OSD will show the picture as follow, if not complete, just close the OSD。
NOTE: You can select Calibration Status – VGA or Calibration Status – YUV item to watch the calibrated
value at any time。
Company Confidential
57
pattern for calibrate YUV Source and notice that the input source must be 480i format 。
After input ready press "Enter" or "Right" key to proceed。
LG ______________________
BS254_BX254_BX324
rev.06
.
Delta____________
2011/06/16