Board Layers - Semtech TSDMRX-5W-EVM User Manual

E. Board Layers
The TSDMRX-5W-EVM PCB is based on a four layer design as shown below. The ground plane in layer
two is recommended to reduce noise and signal crosstalk. The EVM placed all components on the top of
the board for easier evaluation of the system. End product versions of this design can be made
significantly smaller by distributing components on both sides of the board. The Gerber files for this
artwork can be downloaded from the Semtech web page.
Top Layer
Signal Layer
Wireless Charging
User Guide Rev 2.0
TSDMRX-5W-EVM Jun 2016
Ground Plane
Bottom Layer
www.semtech.com
12 of15
Semtech