Connect Peripheral Equipment - Philips 32PW9788 Instruction Manual

Philips real flat technical design line product brochure
Hide thumbs Also See for 32PW9788:
Table of Contents

Advertisement

Available languages

Available languages

Connect Peripheral Equipment

There is a wide range of audio and video equipment that can be connected to your TV.
The following connection diagrams show you how to connect them.
Note:
can handle CVBS and RGB,
EXT. 1
It is preferred to connect peripherals with RGB output to
If your recorder is provided with the EasyLink function, it should be connected to
EasyLink functionality.
Recorder
(VCR+DVD+RW)
CABLE
2
2
EXT.
EXT.
EXT.
1
2
4
Other equipment
CABLE
1
4
2
Digital equipment
EXTERNAL
1/2/3/4
DIGITAL
AUDIO IN
2
EXT. 2
Connect the aerial cables 1, 2 and, to obtain the optimum
picture quality, eurocable 3 as shown.
If your recorder does not have a euroconnector, the only possible
connection is via the aerial cable.You will therefore need to tune in
your recorder's test signal and assign it programme number 0 or
store the test signal under a programme number between 90 and
99, see Manual installation, p. 8.
See the handbook of your recorder.
Decoder and Recorder
Connect a eurocable 4 to your decoder and to the special
euroconnector of your recorder. See also the recorder handbook.
See Decoder, p. 11. You can also connect your decoder directly to
EXT. 1
(except digital sources)
Connect the aerial cables 1, 2 and 3 as shown (only if
&
your peripheral has TV aerial in-/output).
Better picture quality can be obtained if you also connect
eurocable 5 to
é
Look for the test signal of your peripheral in the same way as
you do for a recorder.
When a recorder is connected to
programme from your TV. Only when a recorder is connected to
3 5
EXT. 2
from other connected equipment.
(DVD, Digital Set Top Box, ...)
Connect your digital equipment with a eurocable 1 to one of
&
the euroconnectors
the video input at the right side of the TV.
é
To enjoy Multichannel surround sound from digital sources with
a Dolby Digital audio output also connect an audio cable 2 to
one of the two digital audio in sockets of your TV. Make a
selection in the Setup, Source menu, p. 11.
"
According to the connected digital equipment, select
1
Game
CVBS, RGB and Y/C,
EXT. 3
or
EXT. 1
EXT. 2
or
with a eurocable.
2
EXT. 2
it is possible to record a programme from your TV as well as
(EXT 1
or
Digital STB
and
CVBS.
EXT. 4
as RGB provides a better picture quality.
to benefit from the
EXT. 2
and a eurocable 4 to
you can only record a
EXT. 1
,
or
), or with a cinch cable to
2, 3
4
in the Setup/Source menu. See p. 11.
,
or
.
EXT. 1
3
4
,
,
DVD
SAT
27

Advertisement

Table of Contents
loading

Table of Contents