The Timer - Setting The Clock - Philips 36PT71B1 Instructions For Use Manual

Y our television comes with an on-
screen clock. During normal oper-
ation, the clock appears on the screen
when the STATUS/EXIT button is
pressed or if the TIMER DISPLAY
control is turned ON.
BEGIN
Press the MENU button on the
remote control to show the onscreen
menu.
Press the CURSOR DOWN but-
ton twice to highlight FEATURES.
Press the CURSOR RIGHT but-
ton and the menu will shift to the left.
TIMER will be highlighted.
With TIMER selected, press the
CURSOR RIGHT button again to
shift the display left and highlight the
TIME control.
Press the CURSOR RIGHT but-
ton again to highlight the time indica-
tor area.
Press the CURSOR LEFT or
CURSOR RIGHT button to select
the position or digit you wish to enter.
Press the CURSOR UP or CUR-
SOR DOWN button to select the
digits for the time. Or press the
NUMBERED buttons to enter the
correct time.
Press the CURSOR RIGHT but-
ton to move to the AM or PM posi-
tion.
Press the CURSOR UP or
DOWN button to set AM or PM.
10
Press the STATUS/EXIT button
to remove the menu from the screen.
S H
MART ELP
Remember, be sure to press
0 first and then the hour num-
ber for single-digit entries.
The Clock also can be set automati-
cally using the AutoChron
found on page 4 of the Quick Use
and Installation Guide that came
with your television.
The TVÕs clock settings may be lost
when the TV is unplugged (or when
AC power to the set is interrupted).
T T – S
HE IMER
1
6
7
9
TM feature
C
ETTING THE LOCK
PICTURE TIMER
SOUND AutoLock
PIP
FEATURES
INSTALL CLOSED CAP
FORMAT
POWER
SLEEP
PIP
TV/VCR ON/OFF POSITION FREEZE
A/CH
SWAP SOURCE PIP CH
UP DN
9
7
SOUND PICTURE
3
MENU
M LINK
VOL CH
MUTE
2
SOURCE STATUS/EXIT CC CLOCK
ITR/REC HOME HOME PERSONAL
10
VIDEO MOVIES
INCR. SURR. SURF
PROGRAM LIST OPEN/CLOSE TUNER A/B
OK
CH
MUTE
SOURCE STATUS/EXIT CC CLOCK
ITR/REC HOME HOME PERSONAL
VIDEO MOVIES
INCR. SURR. SURF
PROGRAM LIST OPEN/CLOSE TUNER A/B
OK
13
FEATURES
TIMER
TIMER TIME
START TIME
AutoLock
PIP STOP TIME
CLOSED CAP CHANNEL
FORMAT TUNER MODE
FEATURES
FEATURES
TIMER
TIME
START TIME
STOP TIME
CHANNEL
7
TUNER MODE
FEATURES
TIMER
TIME
START TIME
5
STOP TIME
4
8
CHANNEL
6
TUNER MODE
11
NOTE: The TIME (Clock) fea-
ture can be accessed directly by
pressing the CLOCK button on the
remote control, and then by simply
following steps 5 through 10 to
complete the task.
FEATURES
TIMER
TIME
START TIME
11
STOP TIME
CHANNEL
TUNER MODE
_ _:_ _ AM
10:30 AM
_ _:_ _ AM