Nfc (Only Hwh610 Model) - Samsung HW-H600 User Manual

, 1° (OMiY HW'°H61
0 MODEL}
YOu can connect your SoundStand to an NFC-enabted smart device through a Bluetooth connection with a
simple setup, Once connected, you can enjoy music stored in your smart device through the SoundStand,
_- Connecting with NFC and smart devices
Attach the NFCsticker 1abeton a desired and then approach your smart device to the NFC1abel
:!it/i ii!ii!i i '
Connecting with NFC
!. Detach the NFC sticker 1abeland attach it to a desired spot,
• Putting the NFCsticker within a 3m radius from the unit is recommanded,
2. Enable the NFCfunction of your smart device,
3° Bring your smart device's NFCantenna dose to the NFC1abel,
4° When the connection prompt appears on your smart device's display, select (Yes>,
• Once the connection is established, the completion message appears,
Disconnecting NFC
Bring your smart device's NFCantenna dose to the NFC1abel on the SoundStand again, The disconnection
messageappears on the smart device's display,
To connect another smart device to the SoundStand which is already
connected to another NFC compatible device
After disconnecting from the previouslyconnected device, bring the new smart device dose to the NFC1abet o f the
SoundStand,
• The NFC function is implemented in Android v4,1,2 JeltyBean and tater operating systems,
- To make NFCconnections, your smart device needs both Android OS 4,1.2 JettyBeanor tater and
the NFCtag for NFCfunction execution. YOu also need to download the "Samsung NFC
Connection" application from the Googte Playstore and instatt it on your smart device, Forfurther
detaits, please refer to the smart device's user manual
• The location of the NFC antenna is different in different devices, Confirm the location of your smart
device's antenna in the device's user mamJat before attempting to pair it with the SoundStand,
• tf your smart device is in a thick housing or case, the NFCconnection may not be stabte.
• The N-mark is a trade mark or registered trade mark of the NFC Forum tnc, in the United States and
other countries,
• tf you have trouble with an NFCconnection
Actually touching your smart device to the NFC 1abet c an cause NFCconnection faihJre,
tf the "Empty tag" error is displayed on the smart device, please try again,
Check whether your smart device's antenna is dose enough to the NFClogo on the SoundStand,
• tf you turn off the SoundStand when the Btuetooth Power On feature is ON, and then try to
connect a BhJetooth device that has been previously connected using NFC,the SoundStand wit1
turn on automatically when the device connect£
To set the BhJetooth Power Or] option, see pagel 6,
17