Programmed Recording (Timer); Vps' (Video Programming System) / 'Pdc' (Programme Delivery Control); Programming A Recording (With 'Video Plus+') - Philips 21PV548/07 Operating Instructions Manual

Philips tv-video combi owner manual
Table of Contents

Advertisement

7.

PROGRAMMED RECORDING (TIMER)

Use programmed recording to automatically start and stop a
recording at a later date.
The TV-Video Combi requires the following information for
each programmed recording:
* the date you want to make the recording
* the programme number for the TV channel you want to
record
* the start and stop time of the recording
The TV-Video Combi stores all above mentioned information in
a so-called TIMER-Block. You can programme up to 6 TIMER
blocks a whole month in advance.
'VPS' (Video Programming System) /
'PDC' (Programme Delivery Control)
With 'VPS/PDC', the TV station controls the start time and the
length of the programmed recording. If a TV programme
begins earlier or ends later than planned, the TV-Video Combi
switches on and off at the right time.
You must enter the start time exactly to the minuteduring
programming.
If you would like to programme a time that differs from the
VPS/PDC time, you must switch off 'VPS/PDC'.
Programming a recording
(with 'VIDEO Plus+')
When entering the PlusCode programme number, the
TV-Video Combi receives all necessary information to
programme a recording.
a
Press the
button on the remote control.
TIMER k
b
Enter the entire PlusCode number. This number which
can consist of up to nine digits, is listed in your TV guide
next to the start time of the respective TV programme.
e.g.: 5-234-89 or 5 234 89
Enter 523489 for the PlusCode programming number.
D If you would like to use 'VPS/PDC' to programme the
recording and an additional start time is indicated,
e.g.: (VPS/PDC21.09), you must enter the ShowView
number for the 'VPS/PDC' time.
e.g.: (VPS/PDC21.09) 405-564-898
Enter 405564898 for programming using 'VPS/PDC'.
D If you make a mistake, you can clear your entry
using the
CLEAR (CL)
VIDEO PLUS+ SYSTEM
PLUSCODE NUMBER
53124----
REP.: SELECT
TIMER LIST: TIMER
c
Use
to select repeated daily or weekly recording.
SELECT
'ONCE': One-time recording.
'MO-FR': Daily recordings from Monday through Friday.
'WEEK.': Recordings on the same day every week.
button.
REP.
ONCE
STORE: OK
21

Advertisement

Table of Contents
loading

This manual is also suitable for:

21pv548

Table of Contents