Advertisement
WIN
Share a picture of your light with us,
for your chance to win your next
Brite-R product FREE of charge.
YOUR NEXT
Tag it with
#Brite_R
LIGHT ON US*
@Brite_R
*One winner will be selected each month, available to UK residents only.
Terms apply, visit www.Brite-R.com/Win
Contact Information
To view our FAQ go to our website:
http://www.brite-r.com/faqs/
For any enquiries please contact us below:
http://www.brite-r.com/contacts/
Or you can email us directly at:
info@brite-r.com for product information and,
support@brite-r.com for customer support.
Thank you for supporting Brite-R with your purchase.
www.Brite-R.com
Brite-R Duo LED Headlight
Instruction Manual
www.Brite-R.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for BRITE-R DUO
- Page 1 To view our FAQ go to our website: http://www.brite-r.com/faqs/ For any enquiries please contact us below: http://www.brite-r.com/contacts/ Brite-R Duo LED Headlight Or you can email us directly at: info@brite-r.com for product information and, support@brite-r.com for customer support. Instruction Manual Thank you for supporting Brite-R with your purchase.
-
Page 2: Getting Started
2. All Duo components are designed to withstand the most extreme weather conditions including rain, snow, heat etc. 1. When turned on, do not look directly into the light. The Duo is However do not submerge your light or battery in water. It is not extremely bright and can damage your eyes. -
Page 3: Installation
3. Connect the cable from the light head to the battery. 1. Select an O-ring that best suits your handlebar diameter. Hook the ring around the Duo’s front hook, and wrap the ring around your handlebars to fasten onto the rear hook of the Duo. - Page 4 Installation Installation 3. Feed the Velcro straps of the helmet mount through the exterior vent slits on either side of the helmet (choose a vent closer to the ears). Thread the straps back up from the inside through the centre slits and fold the Velcro back onto itself fastening securely.
-
Page 5: Switch Off
To do so, wrap the Velcro straps around either the Switch Off main belt (for horizontal mounting) or the perpendicular belt (for To switch off the Duo, cycle through the beam modes until the light vertical mounting). Fasten the Velcro securely. You may choose turns off. -
Page 6: Technical Specifications
Specifications Precautions Technical Specifications Precautions when in use 1. Do not touch the headlight lens with bare hands during or Light Output: 1300 Lumens immediately after use. Heat from the bulb may cause injuries. Light Source: 2 x CREE XM-L LED 2.
Need help?
Do you have a question about the DUO and is the answer not in the manual?
Questions and answers