Try to reset the device when such failure occurs. Contact ISA technical support when the error persists after restart or is reoccurring. Forced filtration 24h: Shows the status of forced filtration that can be triggered only via LVLØ front panel.
The LVLØ Ultimate Pool Controller bus device is factory-set with the KNX defined individual address 1.1.222 and can be changed only via ISA remote support. Please make sure this address is not used in KNX network. ETS software used for LVLØ is present by KNX Bus Access and Object Server in ETS.
Need help?
Do you have a question about the LVLO and is the answer not in the manual?
Questions and answers