Linksys RE6300 User Manual page 9

You will be prompted to enter a user name and password. If you did not change them
during setup, leave the user name blank and
you customized the SSID and password, enter those credentials.
If you are connected to your local network, but not to the range extender, you will need
settings.
TIP
Find the
looking for the range extender under connected devices.
Or
Windows XP:
1. Enable UPnP:
a) Click Start, Control Panel, Add or Remove Program, then click
Add/Remove Windows Components.
b) Select Network Services, then click Details.
c) Select UPnP User Interface, then click OK.
2. Open Windows Explorer. Click My Network Places on the left panel.
3. Look for the RE6700 icon on the right panel. (You might be required to change the firewall
for instructions.)
Windows 8, Windows 7, or Vista:
1. Open Windows Explorer (File Explorer in Windows 8). Click
icon on the right panel. (You might be required to change the firewall settings to allow the
2. Right-click the RE6700 icon. Click Properties. Click on the address link in Device webpage.
Mac OS X:
1. Open Safari. Be sure that Bonjour is included in the Bookmarks menu and Favorites bar.
a. Go to Safari Preferences > Advanced and be sure each Bonjour box is selected.
2. Find Bonjour in the Bookmarks
If you have changed your network name and password, choose the network
name and enter the password you created.
IP address
following:
Network. Look for the RE6700