2.1 Sound System with Docking for iPod/iPhone IPH-24808 USER MANUAL Please read and keep these instructions For instruction manual in another language, check online at http://manuel-utilisateur.logisav.fr...
Important safety instructions – please read carefully and keep for future reference To reduce the risk of fire or electric shock, do not expose this product to water, rain or moisture. To prevent the risk of electric shock, do not remove the cover or back of this product.
Page 3
No naked flame sources, such as lighted candles, should be placed on the apparatus. Electric supply Please unplug the product in case of prolonged non-use. If the supply cable is damaged, it must be replaced by the manufacturer or qualified after-sales personnel to avoid any danger.
CONTENT IMPORTANT SAFETY INSTRUCTIONS ………………………………………….………1-2 CONTENT………………………………………………………………………………………...3 ACCESSORIES ........................3 INSTALL THE REMOTE CONTROL BATTERY……………………………………………..3 BASE PLATE INSTALLATION….…………………………………………………..…..……4 PANELS……………………………………………………………………………………..…..5 REMOTE CONTROL…………………………………………………………………………… 6 SYSTEM CONNECTION ………………………………………………………………………..7 VIDEO CONNECTION …………………………………………………………………………..8 BASIC OPERATION……………………………………………………………………..…..9-12 RADIO OPERATION…..……………………………………………………………………….13 TROUBLE SHOOTING……………………………………………………………………….. SPECIFICATION……………………………………………………………………………..ACCESSORIES INSTALL THE REMOTE CONTROL BATTERY (Batteries are not provided) 1.
REMOTE CONTROL NOTE: Align the remote control directly at the remote control sensor of the device. The range of the remote control depends on the health of the battery. Bright light (sun or artificial light) should not fall directly on the remote control sensor. Bright light will decrease the effectiveness of the remote control.
SYSTEM CONNECTION Before connecting acoustic equipment, pay attention to the picture below. Each connection must be safe and firm. Disconnect power cable until you have fished all the connections . Note: Please note that only one Audio-Input can be activated at the same time. Therefore, based on your home configuration, please choose to connect either AUDIO 1 or AUDIO 2 only, but not both.
VIDEO CONNECTION Connect the unit to your TV’s video input (Video Composite or YUV mode) so as to enjoy the movies stored on your iPhone or iPod directly on your TV screen. Please note that this video func on is only available in iPod or iPhone video mode and that it will not decode videos stored on USB or SD devices.
BASIC OPERATION PREPARATIVE Before the unit is turned ON, please check if all the connections are right and safe. Then connect the main power. Press the POWER ON/OFF button on the back panel to turn on the main power. STATE INDICATION OF DISPLAY SCREEN In radio mode, the display screen will show the currently tuned frequency and the mono/stereo status.
BASIC OPERATION PREVIOUS & NEXT In play status, press the button to go to the previous audio file; press the button to go to the next audio file. Note: These buttons are unavailable in audio input. MENU BUTTON While playing the iPod/iPhone, press the MENU button to return to the previous menu of iPod/iPhone. Pod, AUDIO, FM BUTTONS 1) Connect the iPod/iPhone with this unit, then press iPod button on the remote control to enter the iPod/iPhone mode.
Page 12
BASIC OPERATION Press the NUMBER button (0~9) directly to input the required time, then the unit will remember the setting automatically. As to the Alarm setting, firstly press the NUMBER buttons directly to input the required time, then press the ▼...
Page 13
Additionally you may switch your into Airplane mode so as to avoid interference on iPhone your TV screen. Please note the unit can decode videos from your and iPhone device only. It cannot iPod decode photos from the iPod or i hone device. Videos or photos cannot be decoded f o r m a USB or Memory Card device.
FM RADIO OPERATION 1. Enter FM Function While in the operating mode, press the FM button on the remote control to enter FM mode. 2. Select Bands 1) Directly input frequency: press the F button on the remote control, then input the frequency that you want . The range of FM frequency is from 87.50MHz to 108.00 MHz.
TROUBLESHOOTING Power supply can not be turned on * Make sure that the power cord is fully inserted in the mains outlet. The remote control does not work * No power in batteries. Replace the batteries. * Remote controller not aim at the infrared sensor of the unit. No sound * Make sure that the audio cable is connected correctly and securely to the back of your unit and to the sound system.
SPECIFICATION Input voltage: 230V~50Hz Total Output Power: 300W PMPO (2 75W+150W PMPO) Tuner frequency range: FM 87.50 – 108.00MHz Input: iPod/iPhone dock SD memory card slot USB High Speed 2.0 Audio 1 – Audio input connection (2× RCA) Audio 2 – Audio input connection (3.5mm stereo) Ant –...
Page 17
ADMEA / LOGISAV ZI du clos des charmes 26 rue du clos des charmes 77090 - France COLLEGIEN For instruction manual in another language, check online at http://manuel-utilisateur.logisav.fr...
Need help?
Do you have a question about the IPH-24808 and is the answer not in the manual?
Questions and answers