Mounting Bracket Drilling Template For - Easymetal EASYRO 60 User Manual

MOUNTING BRACKET DRILLING TEMPLATE FOR PRE-FILTER
SYSTEM
Please measure and mark the available space on the wall before mounting the wall panel
for the double pre-filter housing. Select the mounting space in such a way that the pre-filter
system remains easily accessible for future maintenance work and filter replacements.
Use the drilling template to determine the distances of the required drill holes.
The holes must have a diameter of 10 mm. Use the enclosed fastening elements (dowels and
screws).
IMPORTANT
Please determine the carrying capacity of the wall or masonry and make sure
the mounting bracket is installed carefully and correctly.
Mounting bracket for the double pre-filter housing
Page 18
This information is subject to copyright laws and may not be reproduced or changed without express written permission of easymetal GmbH.
Drilling template for the mounting bracket
Technical Documentation EASYRO Water Treatment Systems© 2015 easymetal GmbH.
®