Chapter 8 NAS Navigator2
NAS Navigator2 for Windows
NAS Navigator2 is a utility program that makes it easy to display Windows Storage Server, change the TeraStation's
IP address, or check its hard drive in remote desktop. If you installed the TeraStation with the TeraNavigator, NAS
Navigator2 was installed automatically.
NAS Navigator2 will run in the system tray when the computer is on.
Double-click the
icon to start NAS Navigator2.
Click your TeraStation's icon to open a share on the TeraStation and display:
• Total capacity
• Capacity in use
• IP address
• Workgroup
• Subnet mask
• Default gateway
• MAC address
• Firmware version
77