Philips 14PV112/07 User Manual page 3

Front of the device
Power switch: To switch the TV-Video Combi off.
Caution: If you switch off using the power switch, TIMER-recordings are impossible!
Standby/on: To switch TVCR On or Off or to interrupt a menu function.
y y
Volume: In connection with the button
5 5
Programme number minus: previous programme number
P-
Programme number plus: next programme number
P+
Record: To record the programme currently selected.
I
B Playback: To play a recorded cassette.
C /A A
Pause/Stop, eject cassette: To stop the tape; If this key is depressed while in STOP, the cassette is then
ejected from the machine.
When tape playback is stopped, press to fast forward the tape at high speed.
1
0 When tape playback is stopped, press to rewind the tape at high speed.
Sockets on the front:
White socket / AUDIO
VIDEO
Yellow socket /
Small socket / socket for headphones: To connect headphones.
Back of the set
Aerial input socket: To connect the aerial cable.
EXT1/AV1 Scart socket :To connect a satellite receiver, decoder, video recorder, etc.
The control lights at the front of machine
STANDBY Standby LED: lights up when the TV-Video Combi has been switched On by means of the main
switch.
RECORD Recording LED: lights up during recording.
Fast blink: RECORDING PAUSE; TIMER RECORDING NOT STAND-BY.
Slow blink: TIMER RECORDING is stored in a timer block.
STANDBY
+ –
,
input socket: To connect a camcorder or video games (audio).
input socket: To connect a camcorder or video games (video).
to adjust the volume.
3
EN