Omega OCD7C Owner's Manual page 9

OPERATIONS
• Instructions of the 【Time】function
When the warm or cool or refresh programme is selected, the 【Time】button can be
used to adjust the drying time in 10 min. steps.
• Instructions of the 【Intensity】function
Used to adjust the dryness level of the laundry. The level has four grades .
The drying time increases 3 minutes in every grade.
1. The intensity function can be activated only before the programme start.
2. Press the 【Intensity】button repeatedly to select the drying time.
3. Except the 【Cotton Iron】【Qucik】【Synthetic Iron】【Baby Care】【Warm】
【Cool】【Refresh】,all the other programmes can be the【Intensity】function.
• Instructions of the 【Speed dry】
Use to curtail shorten the drying time, the 【Cotton Extra】【Cotton Standard】【Mix】
【Jean】programme can be set the function.
• Instructions of the【Signal】function
Set up the buzzer on or off. In the general condition, the buzzer is on. Please press it if
needed. When the buzzer on:
1. The dryer will give the leading sound if press the extra function buttons.
2. If the dryer is running, rotate the function choosing knob, the dryer will remind the
operator it is an invalid choose.
3. When the drying programme is end, the buzzer will also remind the user
• Instructions of the【Anti-Crease】function
At the end of the drying cycle,the anti-crease operation time is 30 minutes (default ) or 120
minutes (selected).
The 【Anti-Crease】 light shall illuminate when the anti-crease function is selected. This
function prevents the laundry from creases. The laundry can be removed during the
anti-crease phase. Except【Cool】,【Refresh】and 【Baby Care】, all the other programmes
have this function.
15
OPERATIONS
• Instructions of the【My Cycle】function
Used to define and save your favorite proragmmes that are used frequently.
1. Use the programme selector to select the required programme and other drying functions.
2. Press and hold the 【Intensity】button for 3 seconds until the beep and the required
programme has been saved.
3. Turn the programme selector to the 【My Cycle】position, you can start your favorite
proragmmes. If you want to change the 【My Cycle】settings, repeat the steps 1 and 2.
• Instructions of the 【Child Lock】 feature
1.This machine incorporates a special child safety lock, which can prevent children from
carelessly pressing keys or making the faulty operation.
2.When the dryer is at the operation state, press the【Anti-Crease】and 【Signal】buttons
at the same time for over 3 seconds to start child lock function. When child lock function
is set, the display will show child lock icon and no key can effect to the dryer except
【On/Off】button.
Under the start state of the child lock, the【Anti-Crease】and 【Signal】buttons shall
be pressed at the same time for over 3 seconds to release the child lock function.
16