Bin Full / Power Off - GoECOlife GMC120D User Manual

bin full
10. As the shredded paper waste accumulates to full capacity, the Bin Full indicator will light up.
When the waste bin is full, the shredder will not shred any more paper until the bin has
been emptied.
• The LCD panel will look like the diagram shown below.
• The Red LED light underneath the button, "INFO", will flash to warn the user.
• Press the button, "INFO", and the VoiceAssist™ function will announce the problem
and solution.
• To deactivate the VoiceAssist™ mode, press the button "INFO" again.
InfoCenter™ LCD Panel
ON FWD Door Open
Reverse Overload
Bin Full Overheat
Available on following models:
GMC120D
GXC180TA
GXC200TB
power off
11. There are 3 ways to stop the shredder so all power to the shredder will be shut off, also
cutting off any phantom load power leakage.
a. Press the "STOP" button on the control panel.
b. Toggle the main power switch to "OFF" on the rear of the shredder.
c. Or, do nothing, and the GoECO™ power saving technology will turn off automatically
after 30 minutes of idle time.
AUTO
Reverse
Bin Full
Door Open
Overload
Overheat
Lubricate
GSC260TC
GXC220TC
GXC1820TD
GSC3220TD
GXC1631TD
Available on following models:
GXC220TC
GXC1820TD
GXC1631TD
STOP
Button
Full
3/4 Full
1/2 Full
1/4 Full
or less