Honda COUPE 2017 Owner's Manual page 566

uuIf a Tire Goes FlatuChanging a Flat Tire
■
Getting Ready to Replace the Flat Tire
Spare Tire
The tire to be replaced.
564
*
1. Open the trunk floor lid.
2. Take the tool case out of the trunk. Take
Tool Case
the jack and wheel nut wrench out of the
tool case.
3. Unscrew the wing bolt, and remove the
spacer cone. Then, remove the spare tire.
4. Place a wheel block or rock in front and rear
of the wheel diagonal to the flat tire.
Wheel
Blocks
1Getting Ready to Replace the Flat Tire
Models with T125/70 R17 size spare tire
NOTICE
Do not mount the compact spare on the front. If
mounted on the front, the compact spare, smaller in
size than the normal tire, may damage the
differential.
If either front tire goes flat, remove the rear tire on
the same side, and mount the compact spare on the
rear and the rear tire on the front.