It is strong recommended that do not operate this system while driving. ● The RDV360-3D is a parking and driving assistant system which offers the road situa- tion around the vehicle to eliminate blind spots and thus works perfectly as a visual guide for safe parking and driving.
• Keep the RDV360-3D unit out of reach of small children. Removable parts (microSD memory card) can be a choking hazard. • The RDV360-3D unit IS NOT WATERPROOF. Avoid exposing it to rain or other forms of excessive moisture. Water damage is not covered under the warranty.
Daytime Driving This guide is to provide the basic illustration for topological structure of the RDV360-3D system, operating principle and basic concept to help users to understand the whole system installation procedure, camera calibration steps, and how to interact with the...
What’s in the box What’s in the box Your RDV360-3D system comes complete with everything you need to get set up and get going. Please take a moment to review the contents of your system. RDV360-3D Front Rear Left Right...
Product Overview and Features Product Overview and Features Tips: If both USB and 1. microSD Card Slot SD card are plugged 2. USB Slot for Recording Video Storage in, the USB will be the priority 3. Screws for fixing Housing storage.
Product Overview and Features Wiring Diagram Illustration Video output & camera input: B. Red Cable: connect to DVD or monitor trigger C. Yellow Port: video output to the DVD or monitor D. Black Port: Connect to IR remote controller receiver extend cable E.
Product Overview and Features Connector PIN Descriptions Connector PIN Descriptions: Connector A Color Description Pink AV-OUT Power Cable Pink Left Light Trigger Black Power Cable Orange Right Light Trigger Yellow Power Cable Green Reverse Trigger Yellow Right Camera Pink Right Camera Black +Black Right Camera +3D ON/OFF Switch 3D On/Off Switch...
Product Overview and Features Remote Control Illustration Key Number Description Function Enter Settings Menu MODE In 3D Mode, long press 2 seconds enter into 4CH recording mode While in MENU screen, toggle through the icons In 3D mode, short press to switch from 3D to Camera view. Press again to go back to 3D mode.
Product Overview and Features Product Features System main application scenarios Narrow Road/Lane Parallel parking Reverse parking Blind Spots Coverage Turning assist Slope sections Accidents Car DVR Crowded Road Note: This manual gives a basic and general feature description of the system, but it may vary from specific product model and application case.
System Hardware Installation System Hardware Installation Installation Steps Wire routing inside the car Please refer to wiring diagram for more details. Please also be alert for the color and connector size of each extending cable. Wire routing should be from cameras to the host device side. All the cables should be gathered to the host device side.
Camera Calibration Cameras Angle Adjusting camera angle 0-10° 0-5° For adapting to different shape of wing mirror plastic shell, the angle and direction of side cameras are always designed to be free adjusted. Rotate the side cameras according to the image to keep vehicle body in image closely to the side calibration line and meanwhile keep the pixel in wider angles and farther places can be captured as many as possible.
Camera Calibration Camera Calibration Calibration Parameters Setting Please press the "MODE" button once on the remote control to enter the MENU screen. Press "OK" button to select GO. Select the vehicle type: Small, Medium or Large by referring to the dimensions of the actual vehi- cle.
Calibration Tape Placement Calibration Tape Placement Note: As the menu diagram Please refer to the calibration shows, pasting pictures of different vehicle calibration tape around models and sizes to select the vehicle. the correct one for matching your vehicle.
Calibration Tape Placement Calibration Tape Placement Note: As the menu diagram Please refer shows, pasting calibration pictures calibration tape different vehicle models around the vehicle. and sizes to select the correct one for matching your vehicle.
Camera Calibration Calibration Illustrations For Small-duty Vehicle There are always 8 calibration points for each camera which need to be marked in the screen, the third and fourth points will need the placement of the gift box on the tape to place the points. The gift box can be divided into outer and inner one so that each packing box can be used for...
Page 21
Camera Calibration Calibration Illustrations Medium-duty Vehicle There are always 8 calibration points for each camera which need to be marked in the screen, the third and fourth points will need the placement of the gift box on the tape to place the points. The gift box can be divided into outer and inner one so that each packing box can be used for...
Page 22
Camera Calibration Calibration Illustrations Heavy-duty Vehicle There are always 8 calibration points for each camera which need to be marked in the screen, the third and fourth points will need the placement of the gift box on the tape to place the points. The gift box can be divided into outer and inner one so that each packing box can be used for...
Need help?
Do you have a question about the RDV360-3D and is the answer not in the manual?
Questions and answers