Dodocool DC29 Quick Install Manual

Wireless 802.11ac dual band usb adapter

Hide thumbs

Table of Contents

Quick Links

Download this manual

Wirleess 802.11AC Dual band USB Adapter

Quick install guide

Model: DC29

REV.1.0AC

Table of Contents

Need help?

Do you have a question about the DC29 and is the answer not in the manual?

Questions and answers

Summary of Contents for Dodocool DC29

Page 1 Wirleess 802.11AC Dual band USB Adapter Quick install guide Model: DC29 REV.1.0AC...
Page 2 Introduction Thank you for purchasing the Wireless 11AC USB Adapter,. The AC1200 Dual Band Adapter delivers powerful wireless AC technology to your desktop or notebook computer. Simply plug the adapter into an available USB port and connect to a wireless network to access a secure, high-speed internet connection –...
Page 3 Installation IMPORTANT: For proper operation, do not connect the Wireless 11AC USB Adapter to your computer before you install the software. If you do, wait for the Found New Hardware screen to display and click “Cancel”; otherwise, the installation process will likely be adversely affected. Insert the included setup CD in the CD-ROM Drive and start the Setup.exe program.
Page 4 The installer will automatically install the program. When done you will see the picture like below, Pls select “Yes, I want to restart my computer now” and click “Finish” to reboot your computer. With the computer now turned on, insert the Wireless 11AC USB Adapter into an open USB port.
Page 5 Status screen will display, indicating that the installation is in progress. No action is needed at this point. When the Completing the Found New Hardware Wizard screen displays, it indicates that the installation has been successfully completed and your Wireless-N USB Adapter is ready for configuration.
Page 6 Configuration Once the installation is complete, you can configure the Wireless 11AC USB Adapter to connect to a wireless access point (AP). The wireless configuration utility will start automatically, and you’ll also find a tray icon at the lower right in your Windows systems tray. 1.
Page 7 3. If the wireless network uses encryption, you need to input the correct encryption key. The configuration utility automatically suggests the correct authentication type (see the drop-down list), and you should not change the suggested value. NOTE: For WPA/WPA2 networks, you need to select the correct encryption type, as well (AES or TKIP).
Page 8 4. If the wireless access point is successfully connected, you’ll see. NOTE: For advanced settings and additional features of the Wireless 11AC USB Adapter, refer to the user manual on the enclosed CD. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.