Table of Contents
Advertisement
WLAN Advance Settings
Click
to access the WLAN Advance Settings page.
A security key can protect your WLAN from illegal data attacking. The security key
of your wireless device must be consistent with that of the PC.
Configuring the 802.11 Authentication
Open: Open system authentication. A user accessing the WLAN can choose
WEP, WPA-PSK, or WPA2-PSK key to pass the authentication or choose No
encryption to skip the authentication.
Shared: Shared key authentication. It can use only WEP. The user accessing the
WLAN must use the WEP to authenticate.
Configuring the Encryption Mode
There are four encryption modes: No Encryption, WPA-PSK, WPA2-PSK, and WEP.
For details, refer to "错误！未找到引用源。."
Configuring the MAC Filter
Click
to access the WLAN MAC Filter page. You can control and manage
the clients accessing the WLAN, and improve the WLAN security performance.
MAC Restrict Mode
The following table shows the MAC address filter modes:
Parameter
Disabled
The MAC address filter function is disabled.
Allow
The clients with addresses in the MAC Address list are allowed to
connect with the device through the WLAN.
Deny
The clients with addresses in the MAC Address list are not
allowed to connect with the device through the WLAN.
MAC Addresses
Enter MAC addresses in the list. The device can perform the access control over
the clients whose MAC addresses are in the list.
WLAN Bridge
Click
to access the WLAN Bridge page.
Description
21
Advertisement
Table of Contents
