Page 3
Precautions • Please read and follow these instructions, and keep this manual in a safe place. • Keep this unit away from water and any flammable gases or liquids. • Prolonged use may cause fatigue. • Use of the device may cause a loss of balance. Make sure that your surroundings are safe and secure before putting on the headset •...
Page 4
Overview A. Visor locking tab E. Lenses B. Head strap F. Focal adjusters C. Head strap loops G. Interpupillary adjusters D. Magnet button H. Size adjustment feet (×4)
Page 5
Attaching the Head Strap 1. Orient the T-strap with the fuzzy side facing out, and fit the three ends through the attachment loops on the sides and top of the headset. 2. Loop the ends over, and press them onto the touch- fastener strips.
Page 6
Inserting the Phone 1. Open the visor by pulling the locking tab at the top of the headset. 2. Rest your phone on the two feet inside the visor. For smaller phones, remove the adjustment feet by sliding them off of the mounts, and replace them with the larger feet that are included with the headset.
Page 7
Adjusting the Lenses Use the lens adjusters on the bottom of the headset to move each lens forward or back to compensate for near- or farsightedness until the picture is sharp and clear.
Page 8
Using Your Phone with the VR-M2 Insert your phone into the headset, and close the visor. You can use wired headphones or attach a charging cable while using the headset by extending the cables through the gap between the visor and the headset.
Your access to the screen is limited to the Important! magnet button. For more control of your phone and camera while using the headset, use a Bluetooth remote like the Spieltek VR-BTR (available separately). Specifications Phones with screens 3.5 to 6 in. Compatibility (8.9 to 15.2 cm)
One-Year Limited Warranty This Spieltek product is warranted to the original purchaser to be free from defects in materials and workmanship under normal consumer use for a period of one (1) year from the original purchase date or thirty (30) days after replacement, whichever occurs later. The warranty provider’s responsibility with respect to this limited warranty...
Page 11
To obtain warranty coverage, contact the Spieltek Customer Service Department to obtain a return merchandise authorization (“RMA”) number, and return the defective product to Spieltek along with the RMA number and proof of purchase. Shipment of the defective product is at the purchaser’s own risk and expense.
Need help?
Do you have a question about the VR-M2 and is the answer not in the manual?
Questions and answers