Page 3
CONGRATULATIONS You have just acquired an advanced timepiece born from a partnership between La Manufacture L’Épée 1839 and MB&F. Destination Moon has been developed with passion and care by L’Epée 1839’s Master Watchmakers in Delémont - Switzerland.
IMPORTANT INFORMATION Please, be very careful to never touch the movement in the centre of Destination Moon either on the front, on the sides or on the back. It is not recommended to hold Destination Moon only by the top.
To preserve the longevity and function- ality of Destination Moon, do not permanently expose the clock to direct sunlight or in a humid or dusty place. Our clocks are developed to ensure optimal accuracy and reliability.
WINDING THE MOVEMENT To wind the movement, turn the propulsion wheel at the base of the rocket (A) anti-clockwise. The movement should be fully wound every 8 days. Be sure to wind up the spring completely. At the end of the winding procedure, you will feel the necessary force increase significantly;...
HOURS AND MINUTES DISPLAY The hours and minutes are indicated by the arrows, point- ing on the rotating hour and minute disk located above the escapement. In this example it is a quarter to nine (8h45) In this example it is ten o’clock.
NEIL Destination Moon comes with a miniature figurine of an astronaut “Neil”, crafted in silver and stainless steel. The astronaut Neil has a magnet on his chest (see the pic- ture below) which allows to fix him wherever you want on the central ladder of Destination Moon.