Advertisement
PART NAMES & FUNCTIONS
To Switch DPI:
Push mouse wheel button and right button simultaneously for 5 seconds then
green LED will be twinkled to switch either to 1000 DPI or 1600 DPI
* Note 1000 DPI is the factory default setting.
Warning
Do not touch leaking batteries directly. If liquid from the battery gets on skin or in eyes,
flush out with water immediately and seek medical attention.
Do not give batteries to young children, or store batteries where children may access them.
Do not immerse batteries in water or otherwise get them wet.
Battery overheating or leakage may cause product damage.
Do not reverse the battery' s polarity ((+), (-) terminals).
Do not modify, heat or recharge the batteries.
Do not dispose of batteries or the product in a fire.
- 1000dpi : green LED twinkle one time.
- 1600dpi: green LED twinkle two times.
ID Reset Button:
When you want to reset ID, push the ID Reset
button while the power of mouse is on.
Sensor
Power On/Off
Battery Cover
USB Receiver:
Slightly push the USB receiver, then it will be
attached by the power of magnet inside.
7
LED indicator:
Glows amber when the battery is low.
The LED is turned off when the battery
power is good.
Advertisement
