Indication for use ....................7 6. Device description 8 6.1. Technical data ....................8 6.2. Technical data of the laser diodes (depending on the model) ......9 6.3. Contents of delivery ..................9 7. Connectors and functional components 10 7.1. ...
Page 3
Guidelines and manufacturer’s declaration – Electromagnetic immunity – for the laser device without life supporting function ............18 12.6. Recommended protective distance between portable and mobile HF- telecommunication devices and the laser device without life supporting function ..19 13. Manufacturer 20 14. Distributor 20 ...
1.3. AS 50 principle of function The AS 50 will emit monochromatic, coherent laser light to for the irradiation of points and smaller surfaces. Use always with 4 mm applicator. Further information on the wide range of the use of laser devices can be found in technical literature and with scheduled seminars RJ-LASER GmbH (www.rj-laser.com).
Symbol for the laser beam: “Warning for laser beam”. Aiming of laser beam must be adhered to, avoiding any other part of the body other than the treatment area follow treatment protocol of this manual.
To safeguard against unauthorized usage, the AS 50 is equipped with a removable safety plug. The laser can only be operated when the safety plug is inserted. If the AS 50 is not being used store it separately to prevent unauthorized usage.
5.1. Proper usage and field of application The AS 50 is a laser device which is to be used with 4 mm applicator and exclusively in anti-smoking and wellness offices and should only be operated under constant supervision. In order to apply the laser position the probe tip above the irradiation area.
AS 50 Laser class Protection class IP 21 (drip water proof) Device Typ B Absolute failure of the measurement of the laser power Modulation frequency 10 Hz and cw Current supply (charger) Model FRIWO FW 7555M/05, =5 V Weight main unit...
(MZB). For more information, please refer to the device plate. 6.3. Contents of delivery AS 50 main unit with 4 mm applicator, 1 key (coding bridge), charger Ansmann ASC 110 Traveller, instruction manual, carry case. V. 1.2, 26.11.2009...
Status Meaning L1/L2 flashes Pilot + laser beam lights in the rhythm of the frequency or continuous if one of the Start-buttons is pressed Flashes two seconds after pressing the Start button to warn you of the ensuing laser radiation and then it is on continuous to glow.
Starting and using the device Inserting the coding bridge To safeguard against unauthorized use, the AS 50 is equipped with a removable coding bridge. Insert the coding bridge in the socket on the back part of the case. Installing the storage batteries or the rechargeable batteries The battery compartment is located at the back of the AS 50.
8.3. Laser indicator lamp The red pilot diodes in the AS 50 head under and above the laser outlet indicates the direction of the invisible laser beam (pilot beam). The pilot beam meets the laser beam 20 mm away from the laser outlet.
For charging insert the plug of the charger into the socket on the back side of the AS 50 and connect it with the mains supply. The batteries can be charged at any time because they do not have a memory effect.
AS 50 Maintenance 11.1. Inspection of the device We recommend an inspection and calibration at least one year from the purchase date (various test are performed in order to insure that the device is operating within the tolerances that the device was originally designed). This annual inspection/calibration must be submitted to an authorized facility.
The producer will supply spare parts up to 10 years after delivery date. 11.4. Disposal Due to the hazards of laser beams, the AS 50 is not to be disposed of as standard electronic scrap. The device is to be delivered to either the supplier or to the manufacturer for proper disposal.
12.3. Guidelines and manufacturer’s declaration – Electromagnetic radiation The laser device is designed for the operation only with original accessories in ambient conditions indicated below. Client and user have to make sure that the device is operated in such ambient conditions.
AM and FM television and radio broadcasting transmitters. In order to determine electromagnetic ambient conditions with regard to immobile transmitters a study of the location should be taken into consideration. If the field strength measured in the place where the laser device is operated exceeds the above mentioned conformity level the laser device should be watched to proof its function in accordance to the requirements.
The laser device is designed for the operation in electromagnetic ambient conditions where HF-disturbance variables are controlled. Client or user of the laser device can help to avoid electromagnetic disturbances by keeping the minimum distance between portable and mobile HF-telecommunication devices (transmitters) and the laser device as indicated below, dependent on the power output of the communication device.