EliteProAV ITE139XW2-E8 User Manual

Evanesce tab-tension series in-ceiling electric motorized front projection screen

Advertisement

Quick Links

In-Ceiling Electric Motorized Front Projection Screen
Evanesce Tab-Tension Series
Important Safety & Warning Precautions
Make sure to read this user's guide and follow the procedures below.
Caution: The screen's Black Top Drop is already set to its maximum drop distance. There is NO extra
Black Top Drop in the roller. Please be aware of this as it will void your warranty with EliteProAV.
Unapproved changes or modifications (except for cutting the power cord for hardwire installations) to this
unit are prohibited and will void your warranty. For more information, please contact our Technical
Support Department at (877) 511-1211 Ext. 604.
Please retain this user's guide for future reference.
To avoid damaging the unit, do not use with any unauthorized accessories not recommended by
the manufacturer.
Handle the unit carefully during transportation to avoid any damages.
To ensure safe and reliable operation, direct connection to a properly grounded power source is
advised.
The power outlet supplying power to the unit should be close to the unit and easily accessible.
Do not install the unit on uneven, inclined surfaces;
Do not install in damp places to avoid an electric shock or short circuit.
Do not place any heavy objects over the power cord.
Position the power cord properly to avoid creating a trip obstacle.
To avoid an electrical shock or fire, due to a loose contact or short circuit, do not overload the
power cord.
The internal & external parts of this unit are not end user serviceable. Do not attempt to
disassemble this unit by yourself. No one except authorized technicians can open and make
repairs to this unit.
Make sure the power source that this unit is connected to has a continuous power flow.
If there is need to use an extension cord, make sure the cord has an equal rating as the appliance
to avoid over heat.
Do not handle the power plug when your hands are wet or your feet are in contact with water.
Properly dispose of this equipment according to the environmental regulations in your area
when product is no longer of service.
Rev. 042417 DR
User's Guide
1
www.eliteproav.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ITE139XW2-E8 and is the answer not in the manual?

Questions and answers

Summary of Contents for EliteProAV ITE139XW2-E8

  • Page 1 Caution: The screen’s Black Top Drop is already set to its maximum drop distance. There is NO extra Black Top Drop in the roller. Please be aware of this as it will void your warranty with EliteProAV. Unapproved changes or modifications (except for cutting the power cord for hardwire installations) to this unit are prohibited and will void your warranty.
  • Page 2: Installation Warning

    The installer must insure that proper mounting hardware is used to provide adequate strength suitable for the installation. EliteProAV is not liable for any faulty installations. For limit adjustment instructions, please contact our Technical Support Department at (877) 511-1211 Ext. 604 The Screen’s Top Black Drop is already set to its maximum drop distance.
  • Page 3: Screen Operation

    H. Bubble leveler mono trigger cable Screen operation Electric Current: Depending upon region, your EliteProAV™ screen will operate on 100v, 110v, or 220v voltage. 1. After ensuring the power outlet & screen are compatible (voltage), plug the power cord into the poweroutlet.
  • Page 4 G. Suspension Bar J- Hook H. M8 Top Expanding Bolt I. M8 Threaded Rod J. M8 Screw Nut K. M8 Hexagonal Screw L. M8 Screw Washer M. Installation Bracket N. Socket Wrench O. White cover flange panel Rev. 042417 DR www.eliteproav.com...
  • Page 5: Installation Instructions

    Prong Power Cord (2-Prong Power Cord for some countries) for use in a non-concealed power outlet. If your installation will be entirely concealed (including power outlet), EliteProAV strongly recommends a hardwire connection. Please refer to the image below for both 110v & 220v wiring information.
  • Page 6 Install the Suspension Bars (D) to your ceiling according to their distance. Optional Installation (parts & hardware not included) 1. Place the Hanging Bracket (C) in the desired location on the screen’s housing and measure the distance as shown below. (L = Distance) Rev. 042417 DR www.eliteproav.com...
  • Page 7 Note: The length of the installation space is not greater than the screen size table (C3), and the width is not less than the screen size table (A5). Consult the table below (C1) in regards to accommodating the screen casing. The ceiling truss Ceiling Panel Ceiling installation space Ceiling Rev. 042417 DR www.eliteproav.com...
  • Page 8 The hexagonal screws (K) will connect the screen to the rest of the assembly. Once firmly in place, use the nuts (J) to ensure a firm connection. Use the socket wrench (N) to make sure that the bolts are firmly tightened. Rev. 042417 DR www.eliteproav.com...
  • Page 9: Dimensions Table

    89.0 104.3 52.0 63.9 68.5 36.4 HW2-E8 47.4 ITE120 45.1- 104.6 112.1 117.0 119.4 101.3 116.6 58.8 70.7 75.4 36.4 HW2-E8 47.4 ITE135 45.1- 117.7 125.2 130.3 132.7 114.6 129.9 66.2 78.1 82.8 36.4 HW2-E8 47.4 Rev. 042417 DR www.eliteproav.com...
  • Page 10 3300 1681 1984 2102 HW2-E8 1204 ITE126 1146- 2714 2904 3030 3090 2630 3020 1696 1999 2117 XW2-E8 1204 ITE139 1146- 2994 3184 3310 3370 2910 3300 1871 2174 2292 XW2-E8 1204 Note: Data Error ±1" Rev. 042417 DR www.eliteproav.com...
  • Page 11 130.3 132.7 114.6 129.9 66.2 78.1 82.8 36.4 ITE126XW2-E8 106.9 114.3 119.3 121.7 103.5 118.9 66.8 78.7 83.3 36.4 ITE139XW2-E8 117.9 125.4 130.3 132.7 114.6 129.9 73.7 85.6 90.2 36.4 Unit: mm ITE84VW2-E30 1707 1895 2022 2083 2047 2012 1280...
  • Page 12 For local EliteProAV™ contact or Technical Support, please visit www.eliteproav.com Rev. 042417 DR www.eliteproav.com...

Table of Contents