875224 HDMI Switch Splitter 3/2 Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully before connecting, operating or adjusting this product. Please keep this manual for future reference. SURGE PROTECTION DEVICE RECOMMENDED This product contains sensitive electrical components that may be damaged by electrical spikes, surges, electric shock, lightning strikes, etc.
Support Blu-Ray DVD 24/50/60fs/HD-DVD/ xvYCC Audio format DTS-HD / Dolby-trueHD / LPCM7.1 / DTS / Dolby-AC3 / DSD / HD/ HBR With TLS digital cables you can reach up to 25m on the output, up to 25m on the input side HDCP compatible...
875224 HDMI Switch Splitter 3/2 Panel Descriptions Front Panel • IR – IR receiver • SW – switching button • A – OUT HDMI 1, Green for active • B – OUT HDMI 2, Green for active • L1 – IN HDMI 1, Red for active •...
875224 HDMI Switch Splitter 3/2 Rear panel HDMI IN HDMI OUT DC 5V • DC,5V – Input power supply • HDMI OUT A – HDMI Output • HDMI OUT B - HDMI Output, EDID Master OUTPUT, EDID passthrough • HDMI IN 1/2/3 – 3 inputs for HDMI sources...
32°F to 104°F (0°C to 40°C) Temperature Storage - 4°F to 140°F (- 20°C to 60°C) Temperature Power Supply 5V/1A DC Package Contents 1x 875224 HDMI Switch Splitter 3/2 1x 5V/1A Power Supply 1x IR remote control TLS electronics GmbH Contact: info@tls-electronics.de...
TLS electronics products are warranted against defects in material and workmanship for three years from the date of shipment. During the warranty period, TLS electronics will, at its option, repair or replace products that prove to be defective. Repairs are warranted for the remainder of the original warranty or a 90 day extended warranty, whichever is longer.
The warranty does not cover replacement or repair necessitated by loss or damage from any cause beyond the control of TLS electronics, such as lightning or other natural and weather related events or wartime environments. The warranty does not cover any labor involved in the removal and / or reinstallation of warranted equipment or parts on site, or any labor required to diagnose the necessity for repair or replacement.
In the event the product returned to TLS electronics has been discontinued (i.e. the product is no longer being manufactured by TLS electronics but is still under warranty), TLS electronics will, at its discretion, either repair or replace with recertified product.
Page 11
Shipping your RMA to TLS electronics using regular mailing envelopes is not acceptable, as they do not protect the product from damage during shipping. TLS electronics will not repair or replace a module that is shipped in such a way that the product is not properly protected.
Need help?
Do you have a question about the 875224 and is the answer not in the manual?
Questions and answers