Configuring Network - I-O Corporation ProEdge User Manual

Configuring Network

The VSR operates virtually identical to a standard Windows XP-based networked
workstation. Factory Default settings for the network adapter is set to obtain it's IP
Address automatically from the local network via DHCP.
When the VSR initially boots, it will show its IP Address on the third line of the initial
LCD screen. If no IP Address is assigned, either automatically or static, the third line will
be blank and the "Network" LED light on the front panel will be red.
If a Static IP Address needs to be assigned, then a network administrator would
connect to the VSR either manually or via RDP (Remote Desktop Session).
Manual Connection: To connect to the VSR manually, simply connect a monitor,
keyboard, and mouse to the VSR and configure its Static IP Address like any other
workstation on their network.
Remote Desktop Connection: If the VSR is already connected to a network with a
valid IP Address, an Administrator can connect to it via a standard Remote Desktop
Client. The login credentials for the VSR Desktop is:
Username = stream
Password = ProEdge (case sensitive with Capital "P" and "E")
Once connected to the XPe Desktop of the VSR, an Administrator may configure the
Network as desired through the Network Connections area of the Control Panel.
6